Icom ID-4100A User Manual - Page 43
◇ Selecting a Menu item, ■ Menu items and their details
![]() |
View all Icom ID-4100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
DDSelecting a Menu item Example: Set the "Auto Power OFF" item to "30 min." Time Set > Auto Power OFF 1. Push [MENU]. 2. Rotate [DIAL] to select "Time Set," then push [ï]. 3. Select "Auto Power OFF," then push [ï]. 4. Select "30min," then push [ï]. ••Sets the option, then goes back a tree level. (TIME SET screen is displayed.) 5. Push [MENU]. ••Returns to the standby screen. TIP: To return to the default setting: 1. Push [QUICK] in step 4. 2. Select "Default," then push [ï]. MENU SCREEN 4 ■■Menu items and their details This topic describes the Menu items and their details. See the Advanced manual for details. (Section 9) DUP/TONE... 4 Settings to access repeaters. Offset Freq Sets the frequency offset for duplex (repeater) operation. Repeater Tone Selects a tone frequency used to access the repeaters. TSQL Freq Selects a tone frequency for the Tone Squelch or the Pocket Beep function. Tone Burst Turns the Tone Burst function ON or OFF. This function is used to suppress the squelch tail noise of FM mode on the RX side, if you transmit a signal which superimposes the CTCSS tone or subaudible tone. DTCS Code Selects a DTCS (both encoder/decoder) code for DTCS Squelch or the Pocket Beep function. DTCS Polarity Selects the DTCS polarity for the DTCS Squelch or the Pocket Beep function. Digital Code Selects a digital code for the Digital Code Squelch function. BASIC MANUAL 28
![](/manual_guide/products/icom-id4100a-user-manual-b0b6df7/43.png)