Icom ID-4100A User Manual - Page 58
SCAN OPERATION, ■ VFO mode scan, ◇ Scan type
![]() |
View all Icom ID-4100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
6 SCAN OPERATION Scanning is a versatile function that can automatically search for signals. A scan makes it easier to locate stations to contact or listen to, or to skip unwanted channels or frequencies. This section describes the basic scan operation. ■■VFO mode scan 1. Push [V/M] several times until you enter the VFO mode. 2. Hold down [SCAN] for 1 second. ••Opens the Scan Type Select window. LLIf you hold down [SCAN] for 3 seconds, the last selected scan starts. 3. Rotate [DIAL] to select a scan type, then push [ï]. ••The scan starts. DDScan type The VFO mode scan has 6 scan types. ••ALL: Full scan ••BAND: Band scan ••P-LINK0 ~ 9: Program link scan ••P00 ~ 24: Program scan ••DUP: Duplex scan (Displayed only when duplex is set.) ••TONE: Tone scan (For the Tone Squelch scanning) LLThe frequencies that are set as a Skip channel (PSKIP) are skipped during a scan. (p. 44) LLWhen the "Program Skip" item is set to "OFF," the Skip channel frequencies are not skipped. (p. 29) (Scan > Program Skip) LLThe decimal point and the selected scan type icon blink. LLWhen receiving a signal, the S-meter displays the received signal strength. 4. Push [SCAN]. ••Cancels the scan. TIP: ••During a scan, rotating [DIAL] switches the scanning direction. ••During a scan, you can change the operating band, tuning step, and so on, on the Quick Menu window. ••The scan continuously runs, even if you push [MENU] or [QUICK] during a scan. 43 BASIC MANUAL
![](/manual_guide/products/icom-id4100a-user-manual-b0b6df7/58.png)