Icom ID-4100A User Manual - Page 27

PANEL DESCRIPTION 2 11 AUTO POWER OFF ICON Displayed when the Auto power OFF function is ON. 12 GPS ICON ••Displays the status of the GPS receiver. (p. 51) •• is displayed when you set the GPS alarm. 13 microSD CARD ICON (p. 48) ••Displayed when a microSD card is inserted. ••Blinks while accessing the microSD card. 14 RECORD ICON •• : Displayed while the transceiver is recording. •• : Displayed while the recording is paused. 15 VOX ICON Displayed when the transceiver is connected to the optional VS-3 Bluetooth® headset, and the VOX function is ON. 16 Bluetooth ICON Displayed when the transceiver (UT-137 Bluetooth unit is installed) connects to a Bluetooth® device. LLSee the Advanced manual for details. (Section 12) 17 EMR/BK/PACKET LOSS/AUTO REPLY ICONS ••EMR: Displayed when you select the Enhanced Monitor Request (EMR) mode. ••BK: Displayed when you select the Break-in (BK) mode. ••L: Displayed when packet loss has occurred. •• : Displayed when you select the Automatic Reply function. (p. 33) 18 WEATHER ALERT ICON Displayed when the Weather Alert function is ON. (Only the USA version transceiver) 2 19 PRIORITY ICON Displayed when Priority watch is turned ON. 20 TONE ICONS Mode: FM/FM-N ••TONE: Enables the subaudible tone encoder. ••TSQLS: Enables the tone squelch with the Pocket Beep function. ••TSQL: Enables the Tone Squelch function. ••DTCSS: E nables the DTCS squelch with the Pocket Beep function. ••DTCS: Enables the DTCS Squelch function. ••TSQL-R: Enables the Reverse Tone Squelch function. ••DTCS-R: Enables the Reverse DTCS Squelch function. ••DTCS(T) ("DTCS" blinks): When you transmit, the selected DTCS code is superimposed on your normal signal. When you receive, the function is OFF. BASIC MANUAL 12