Icom ID-4100A User Manual - Page 36
■ Selecting the Mode, ◇ VFO mode, ◇ Memory mode, ◇ Call channel mode, ◇ Weather channel mode
View all Icom ID-4100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3 BASIC OPERATION ■■Selecting the Mode DDVFO mode You use the VFO mode to set the operating frequency. DDMemory mode You use the Memory mode to operate on Memory channels. DDCall channel mode You use the Call channel mode to operate on the Call channels. 1. Push [V/M] several times until you enter the VFO or Memory mode. ••In the Memory mode, and the selected Memory channel number are displayed. LL Informatio ••Pushing [V/M] toggles between the VFO and Memory modes. ••To enter the Call channel mode, hold down [CALL] for 1 second. ••In the Call channel mode, "144 C0," "144 C1," "430 C0," or "433 C1" is displayed. ••In the Call channel mode, push [CALL] to cancel the mode. 2. Rotate [DIAL] to select an operating frequency or a channel. DDWeather channel mode (Selectable in only the USA version transceivers) You can use the Weather channel mode to hear weather broadcasts from the National Oceanographic and Atmospheric Administration (NOAA) broadcasts. 1. Push [QUICK]. 2. Rotate [DIAL] to select "Weather CH," then push [ï]. ••The selected weather channel number ("WX-01" to "WX-10") is displayed. LLTo cancel the mode, select "Weather CH OFF" in the Quick Menu window. [ï] 21 BASIC MANUAL [DIAL] [V/M]/[CALL] [QUICK]