Insignia NS-PDP42 User Manual (English) - Page 9

Insignia NS-PDP42 42" Plasma TV-720P Grounding Make sure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Power outlet Using a signal amplifier or two-way splitter You may need to install a signal amplifier or a two-way splitter if: • Reception is poor (use a signal amplifier). • Signal from the antenna needs to be split between two TVs (use a two-way splitter). Short-circuit breaker Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Connecting an antenna or cable TV Analog and digital TV signals on a single cable To connect an antenna or cable TV: 1 Connect one end of a 75 ohm cable to the ANTENNA/CABLE IN jack on the back of your TV. Cable TV OR ANTENNA/ CABLE IN ANTENNA/ CABLE IN Signal amplifier or two-way splitter Connecting a standard A/V device To connect a standard A/V device: 1 Connect the video (yellow), right audio (red), and left audio (white) plugs on a standard A/V cable to the AV1 (back) or AV2 (side) jacks on your plasma TV. Side jacks shown Antenna 2 Connect the other end of the cable to the antenna or cable TV jack. Analog and digital TV signals on separate cables To connect an antenna or cable TV: ANTENNA/ CABLE IN L AUDIO R VIDEO 2 Connect the plugs on the other end of the cable to the corresponding jacks on the external device. 3 Turn on your plasma TV and the device. 4 Press INPUT one or more times to select AV1 or AV2. www.insignia-products.com 7