Home » Intel Manuals » Motherboards » Intel SE7505VB2 » Manual Viewer

Intel SE7505VB2 Product Specification - Page 72

Advanced Menu, Intel® Server Board SE7505VB2, Advanced, Table 51. Advanced Menu, Revision 1.2

Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

BIOS Intel® Server Board SE7505VB2 10.1.6 Advanced Menu To access this menu, select Advanced on the menu bar at the top of the screen. Main Advanced Security I/O Device Configuration On Board Devices PCI Configuration Server Menu Console Redirection Event Logging Hardware Monitor Power Boot System Exit Table 51 lists the selections available on the Advanced menu. This menu configures advanced features available through the chipset. Table 51. Advanced Menu Feature I/O Device Configuration Onboard Devices PCI Configuration Server Menu Console Redirection Event Logging Hardware Monitor Installed O/S Boot-time Diagnostic Screen Choices Select to display submenu Select to display submenu Select to display submenu Select to display submenu Select to display submenu Select to display submenu Select to display submenu • Other • Win2000/.NET/ XP (default) • NT4 • NetWare • Disabled (default) • Enabled Description Configures the I/O ports. Configures the onboard RAID, network, and USB controllers. Configures PCI or RAID devices. Sets options for server features. Provides additional options to configure the console. Displays the event logs. Displays voltages, temperatures, and fan speeds for the system. Specifies the primary operating system. An incorrect setting can cause some operating systems to behave erratically. Note: If you select NT4, an additional submenu item, NT4 Installation Workaround, will appear. It is disabled by default. To install Windows NT† 4.0, you need to change the NT4 Installation Workaround option to Enabled. Disable it to install pertinent service packs. Enables or disables the boot-time diagnostic screen. Disabled will display the splash screen over the diagnostic screen. This splash screen can be changed to show an OEM-based logo. 72 Revision 1.2 Intel part number C32194-002

Section	Page
Introduction	13
SE7505VB2 Server Board Overview	14
Intel® Server Board SE7505VB2 Feature Set	14
Functional Architecture	16
Processor and Memory Subsystem	16
Processor Support	16
Processor VRD	17
Reset Configuration Logic	17
Processor Module Presence Detection	17
Interrupts and APIC	17
Memory Subsystem	17
Memory DIMM Support	18
Memory Configuration	19
Memory Cooling	19
I2C Bus	21
DRAM ECC	21
The Intel® E7505 Chipset	21
MCH Memory Architecture Overview	22
DDR Configurations	23
Memory Controller Hub (MCH)	23
AGP 8X Bus	24
P64H2	24
PCI Bus P64-B I/O Subsystem	24
PCI Bus P64-C I/O Subsystem	24
ICH4	24
PCI Bus P32-A I/O Subsystem	25
PCI Bus Master IDE Interface	25
USB Interface	25
Compatibility Interrupt Control	26
APIC	26
General Purpose Input and Output Pins	26
Power Management	28
Super I/O	28
GPIOs	29
Serial Ports	29
Serial A	29
Serial B	29
Floppy Disk Controller	30
Keyboard and Mouse	30
Wake-up Control	30
BIOS Flash	30
Clock Generation and Distribution	31
PCI I/O Subsystem	33
PCI Subsystem	33
P32-A: 32-bit/33-MHz PCI Subsystem	33
Device IDs (IDSEL)	33
P32-A Arbitration	34
P64-B and P64-C: 64-bit/100- or 66-MHz PCI Subsystem	34
Device IDs (IDSEL)	34
P64-B Arbitration	35
P64-C Arbitration	35
Serial ATA Controller	35
Video Controller	36
Video Modes	37
Video Memory Interface	37
Host Bus Interface	38
Network Interface Controller (NIC)	39
NIC Connector and Status LEDs	39
Interrupt Routing	40
Legacy Interrupt Routing	40
APIC Interrupt Routing	40
Legacy Interrupt Sources	41
Serialized IRQ Support	41
IRQ Scan for PCIIRQ	41
PCI Error Handling	41
Hardware Monitoring	45
Monitored Components	45
Fan Speed Control	46
Chassis Intrusion	46
SE7505VB2 ACPI Implementation	48
ACPI	48
Front Panel Switches	48
Wake up Sources (ACPI and Legacy)	49
SE7505VB2 Connectors	50
Main Power Connector	50
Memory Module Connector	51
Processor Socket	52
I2C Header	55
PCI Slot Connector	55
AGP 3.0 Pro50 Connector	58
Front Panel Connector	59
VGA Connector	59
NIC Connector	60
IDE Connector	60
SATA Connector	61
USB Connector	62
Floppy Connector	63
Serial Port Connector	63
Keyboard and Mouse Connector	64
Miscellaneous Headers	64
Fan Header	64
Intrusion Cable Connector	65
Configuration Jumpers	66
System Recovery and Update Jumpers	66
BIOS	67
Using the BIOS Setup Utility	67
If You Cannot Access Setup	67
Starting Setup	67
Setup Menus	67
Menu Selection Bar	69
Main Menu	70
Primary/Secondary, Master/Slave Submenus	71
Advanced Menu	72
I/O Device Configuration Submenu	73
On Board Device Submenu	76
PCI Configuration Submenu	77
Server Menu Submenu	78
Console Redirection Submenu	79
Event Logging Submenu	81
Hardware Monitor Submenu	82
Security Menu	83
Power Menu	84
Boot Menu	85
System Menu	86
Exit Menu	87
Upgrading the BIOS	88
Preparing for the Upgrade	88
Recording the Current BIOS Settings	88
Obtaining the Upgrade Utility	88
Creating a Bootable Diskette	89
Creating the BIOS Upgrade Diskette	89
Upgrading the BIOS	89
Crisis Recovery Diskette	90
Creating the Crisis Recovery Diskette	91
Manually Recovering the BIOS	92
Error Handling and Reporting	93
POST Error Beep Codes	93
BIOS Event Log	93
Absolute Maximum Ratings	94
Mean Time Between Failures (MTBF) Test Results	94
Power Information	95
SE7505VB2 Server Board Power Budget	95
Power Supply Specifications	96
Power Timing	96
Voltage Recovery Timing Specifications	99
Product Regulatory Compliance	100
	100
Product Safety Compliance	100
Product EMC Compliance	100
Mandatory / Standard: Certifications; Registration; Declarations	100
Other Product Mandatory Regulations to Consider due to new Emerging International Requirements	101
Important Product Regulation Requirements	101
Product Regulatory Compliance Markings	101
Electromagnetic Compatibility Notices	102
Europe (CE Declaration of Conformity)	102
Australian Communications Authority (ACA) (C-Tick Declaration of Conformity)	102
Ministry of Economic Development (New Zealand) Declaration of Conformity	102
BSMI (Taiwan)	102
Replacing the Back up Battery	102

Match case Limit results 1 per page

BIOS

Intel® Server Board SE7505VB2

10.1.6

Advanced Menu

To access this menu, select Advanced on the menu bar at the top of the screen.

Main

Advanced

Security

Power

Boot

System

Exit

I/O Device Configuration

On Board Devices

PCI Configuration

Server Menu

Console Redirection

Event Logging

Hardware Monitor

Table 51 lists the selections available on the Advanced menu. This menu configures advanced

features available through the chipset.

Table 51. Advanced Menu

Feature

Choices

Description

Select to display

submenu

Configures the I/O ports.

Onboard Devices

Select to display

submenu

Configures the onboard RAID, network, and USB controllers.

PCI Configuration

Select to display

submenu

Configures PCI or RAID devices.

Server Menu

Select to display

submenu

Sets options for server features.

Console Redirection

Select to display

submenu

Provides additional options to configure the console.

Event Logging

Select to display

submenu

Displays the event logs.

Hardware Monitor

Select to display

submenu

Displays voltages, temperatures, and fan speeds for the system.

Installed O/S

Specifies the primary operating system.

An incorrect setting can

cause some operating systems to behave erratically.

Note:

If you select NT4, an additional submenu item, NT4

Installation Workaround,

will appear.

It is disabled by default.

install Windows NT

†

4.0, you need to change the NT4 Installation

Workaround option

Enabled.

Disable it to install pertinent service

packs.

Boot-time Diagnostic

Screen

Enables or disables the boot-time diagnostic screen.

Disabled

will display the splash screen over the diagnostic screen.

This splash screen can be changed to show an OEM-based logo.

I/O Device Configuration

•

Other

•

Win2000/.NET/

XP (default)

•

NT4

•

NetWare

•

Disabled

(default)

•

Enabled

Revision 1.2

Intel part number C32194-002