Invacare M61 Owners Manual - Page 37

Adjusting Angle, Adjusting Height

Get Invacare M61 PDF manuals and user guides View all Invacare M61 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

SECTION 6-ARMS Adjusting Angle NOTE: For this procedure, refer to FIGURE 6.3. ƽ WARNING Pinch point may occur when adjusting the arm angle position. 6. Repeat STEPS 1‐5 for opposite armrest, if necessary. Arm Pad Pinch Point 1. Lift up the armrest. 2. Loosen the jam nut. 3. Adjust the socket screw up or down to the desired arm angle position. 4. Tighten the jam nut. 5. To determine the same angle for the opposite armrest, count the exposed threads after the jam nut has been tightened. Adjustment Screw Count Exposed Thread Jam Nut FIGURE 6.3 Adjusting Angle Adjusting Height NOTE: For this procedure, refer to FIGURE 6.4. 1. Remove the socket screw that secures the armrest to the seat frame assembly. 2. Adjust the armrest to one of four positions. 3. Reinstall the socket screw that secures the armrest to the seat frame assembly and tighten securely. Height Adjustment Holes Armrest Lock Knob Arm Frame Assembly FIGURE 6.4 Adjusting Height Part No 1125085 37 Pronto® M51™and M61™with SureStep®

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
SECTION 6—ARMS
Part No 1125085
37
Pronto® M51™and M61™with SureStep®
Adjusting Angle
NOTE: For this procedure, refer to FIGURE 6.3.
±
WARNING
Pinch point may occur when adjusting
the arm angle position.
1.
Lift up the armrest.
2.
Loosen the jam nut.
3.
Adjust the socket screw up or down to
the desired arm angle position.
4.
Tighten the jam nut.
5.
To determine the same angle for the
opposite armrest, count the exposed
threads after the jam nut has been
tightened.
6.
Repeat STEPS 1
‐
5 for opposite armrest,
if necessary.
FIGURE 6.3
Adjusting Angle
Adjusting Height
NOTE: For this procedure, refer to FIGURE 6.4.
1.
Remove the socket screw that secures the armrest to the seat frame assembly.
2.
Adjust the armrest to one of four positions.
3.
Reinstall the socket screw that secures the armrest to the seat frame assembly and
tighten securely.
FIGURE 6.4
Adjusting Height
Arm Pad
Adjustment
Screw
Jam Nut
Count Exposed Thread
Pinch Point
Armrest
Height
Adjustment
Holes
Arm Frame
Assembly
Lock Knob