Invacare M61 Owners Manual - Page 72
Repositioning the Joystick
View all Invacare M61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
SECTION 12-ELECTRONICS Office Style Seat Mounting Bracket and Adjustment Lock Lever Joystick Mounting Tube Joystick Standard Arm DETAIL "A" - TIE-WRAP LOCATIONS Office Style Seat Standard Arm Mounting Screws Tie-Wrap Here Joystick Tie-Wrap Here Joystick Cable FIGURE 12.1 Removing/Installing the Joystick Repositioning the Joystick Van Seat NOTE: For this procedure, refer to FIGURE 12.2 on page 73. NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick assembly. 1. Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket. 2. Remove the joystick from the wheelchair. 3. Remove the three hex mounting screws, spacers and locknuts that secure the mounting bracket to the three mounting holes on the arm frame. NOTE: The mounting bracket is mounted to the inside of the arm frame. 4. Reposition the mounting bracket on the opposite arm frame. Pronto® M51™and M61™with SureStep® 72 Part No 1125085