Invacare M61 Owners Manual - Page 61
Using the Proper Batteries, Removing/Installing Batteries from/into Battery Tray
View all Invacare M61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
SECTION 11-BATTERIES Using the Proper Batteries NOTE: For this procedure, refer to FIGURE 11.1. 1. Place battery on ground/flat surface. 2. Visually draw a horizontal and vertical centerline through the middle of battery (FIGURE 11.1). 3. Position the battery so that the terminals are above the horizontal centerline. 4. Visually inspect the battery to ensure the correct position of the POSITIVE and NEGATIVE terminals (FIGURE 11.1). ƽ WARNING Batteries with terminal configuration as shown below MUST be used. Batteries that have the reverse terminal configuration MUST NOT be used - otherwise injury and damage may occur. Use This Configuration NEGATIVE (-) Battery Terminal DO NOT Use POSITIVE (+) Battery Terminal NEGATIVE (-) Battery Terminal U1 Battery POSITIVE (+) Battery Terminal FIGURE 11.1 Using the Proper Batteries U1 Battery Removing/Installing Batteries from/into Battery Tray ƽ WARNING ALWAYS use the battery handle when lifting the battery. It is the most convenient method and assures that the battery acid will not spill. It also helps to prolong the life of the battery. DO NOT tip the batteries. Keep the batteries in an upright position. Part No 1125085 61 Pronto® M51™and M61™with SureStep®