Invacare M61 Owners Manual - Page 49
Adjusting Footrest Height
View all Invacare M61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
SECTION 9-FRONT RIGGINGS Removing 1. Push the front rigging release lever inward and rotate the footrest out. 2. Lift up on front rigging and remove from the wheelchair. 3. Repeat STEPS 1‐2 for opposite side of wheelchair. Adjusting Footrest Height Model PHWH93 NOTE: For this procedure, refer to FIGURE 9.2. 1. Remove any accessories from the footrest(s). 2. Remove the footrest from the wheelchair. Refer to Installing/Removing Front Riggings on page 48. NOTE: Lay footrest on a flat surface to simplify section. 3. Remove the hex bolt, coved washers and locknut that secure the lower footrest to the footrest support. 4. Reposition the lower footrest to the desired height. 5. Reinstall hex bolt, coved washers and locknut that secure lower footrest to footrest support. Tighten securely. 6. Repeat STEPS 1‐5 for the opposite side of the wheelchair footrest, if necessary. 7. Reinstall the footrest(s) onto the wheelchair. Refer to Installing/Removing Front Riggings on page 48. 8. Reinstall any accessories onto the footrest(s). Locknut Coved Washer Footrest Support Coved Washer Hex Bolt Lower Footrest FIGURE 9.2 Adjusting Footrest Height - Model PHWH93 Part No 1125085 49 Pronto® M51™and M61™with SureStep®