Invacare M61 Owners Manual - Page 52
Adjusting/Replacing Telescoping Front Rigging Supports - Office Style Seat
View all Invacare M61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
SECTION 9-FRONT RIGGINGS 4. Using the two socket bolts and locknuts, secure the telescoping front rigging support to the seat frame as shown in FIGURE 9.6. 5. If necessary, repeat STEPS 2‐4 on remaining telescoping front rigging support. 6. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 42. Mounting Bolts Seat Telescoping Front Rigging Support Hinge Locknuts Spacers Inner Mounting Holes Pins 8 76 5 4 3 2 Not Used Mounting Holes FRONT RIGGING MODEL PHW93 PH904A and PHAL4A STANDARD POSITION 18 inches wide 20 inches wide Holes 4 and 5 Holes 4 and 5 Holes 3 and 4 Holes 3 and 4 1 INCH OUT 18 inches wide Holes 5 and 6 Holes 4 and 5 20 inches wide Holes 5 and 6 Holes 4 and 5 2 INCHES OUT 18 inches wide Holes 6 and 7 Holes 5 and 6 20 inches wide Holes 6 and 7 Holes 5 and 6 FIGURE 9.6 Adjusting/Replacing Telescoping Front Rigging Supports - Office Style Seat Pronto® M51™and M61™with SureStep® 52 Part No 1125085