JVC GY-DV550E Instruction Manual - Page 22
Rear - mini dv camcorder
View all JVC GY-DV550E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2. CONTROLS, INDICATORS AND CONNECTORS 2-6 Rear Section !0 PUSH o VTR/RM DV CAMCORD GY-DV550 q w e DV LINE EARPHONE DC OUTPUT MIC +48V ON LINE MIC +48V ON FRONT AUDIO IN REAR INTERCOM DC INPUT t y r ui PROMPTER OUTPUT Y/C OUT MONITOR OUT LINE OUT CH-1 CH-2 !1 TC IN TC OUT REMOT BREAKER 1 [DV] connector Using a DV cable (optional), a digital video component with DV connector can be connected here. This connector is used for output of the DV signal or to input the VCR control signal from the digital video component with DV connector. • To remote control the VCR with a VCR control signal from this connector, set the VCR Setup Menu item No. 050 REMOTE SELECT to "IEEE1394". 2 [EARPHONE] earphone jack This is a mini-jack for connecting an audio monitoring earphone. Plug in an earphone or headphone with a 3.5 mm diameter plug. Audio is outputted in monaural. The earphone can also be used to monitor alarm tones depending on situations. The sound from the monitoring loudspeaker is interrupted when an earphone is connected here. 3 [DC OUTPUT] connector Power output connector to a wireless microphone transmitter, etc. The supply voltage is identical to the voltage supplied to the unit (DC 12V max. 0.1 A). 4 1 3 2 (Surface profile) No. Signal 1 GND 2 - 3 - 4 DC +12V (power through) 22 Bottom side 4 [AUDIO IN REAR] audio input rear connector (XLR 3-pin) Connect the external audio equipment or microphone to this connector. Set the AUDIO IN REAR LINE/MIC select switch 5 according to the connected equipment. To record the audio of this connector, set the CH-1 AUDIO INPUT switch 7 or the CH-2 AUDIO INPUT switch 8 on page 14 to "REAR". (AUDIO IN connector) 2 1 3 No. Signal 1 GND 2 HOT 3 COLD 5 [AUDIO IN REAR LINE/MIC] AUDIO IN REAR select switch Selects the audio signal input to the 4 AUDIO IN REAR connector. LINE : Set to this position when connected to audio equipment, etc. The reference input level is +4 dBs. MIC : Set to this position when the microphone is connected. The reference input level is -60 dBs. MIC +48V ON: Set to this position when the microphone requiring +48 V power supply (phantom microphone, etc.) is connected. This connector supplies +48 V DC current.