JVC GY-DV550E Instruction Manual - Page 34

Attaching the Microphone provided, Attaching the Microphone optional

Get JVC GY-DV550E - Studio Dv Camcorder PDF manuals and user guides View all JVC GY-DV550E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS 3-4 Attaching the Microphone (provided) Provided Microphone 1.3. 4. 2. 5. Connecting the provided microphone to the viewfinder. The provided microphone is a phantom microphone. 1. Loosen the stopper screw on the viewfinder. 2.Attach the microphone to the attachment guide on the viewfinder as illustrated. 3. Confirm that there is no gap between the microphone and the viewfinder, and then tighten the stopper screw. 4. Tighten the microphone screw. The microphone should be firmly attached. 5. Connect the cable from the microphone to the AUDIO IN FRONT connector on the front section of the camera. 6. Secure the microphone cable using the cable clamp located on the front of the camera. CAUTION: When this microphone is attached, the range that the viewfinder can be moved to the left will be reduced. Please purchase a separately sold microphone if you prefer to observe through the viewfinder using your left eye. 3-5 Attaching the Microphone (optional) 1. 2. 4. With the optional KA-A50 microphone holder, the optional microphones MV-P615 (Phantom microphone) can be used. KA-A50 3. Microphone holder Attaching the Microphone with KA-A50 1. Secure the microphone holder with 2 screws. 2. Turn the small knob located on the outer side of the microphone holder anticlockwise to loosen it, and loosen the large knob located on the inner side in the same way. Rotate the large knob fully anticlockwise to open the holder. 3. Attach the microphone to the microphone holder so that the microphone does not interfere with the cassette cover. 4. Set the microphone holder so that the height is level, and tighten the inside and outside knobs to secure the microphone. 5. Connect the microphone cable to the AUDIO IN FRONT connector. 6. Secure the microphone cable using the cable clamp located on the front of the camera. 7. Make sure to perform the correct settings for use of a phantom microphone. Note: • When the light mounted on the camera is used at the same time, if the microphone in use has a long sound collecting section (ultra-directional type, etc.), the microphone's shadow may influence the image. AUDIO IN FRONT Microphone MV-P615 connector cable 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS
34
3.
MV-P615
Microphone
cable
AUDIO IN FRONT
connector
2.
4.
1.
Note:
Connecting the provided microphone to the viewfinder.
The provided microphone is a phantom microphone.
1.
Loosen the stopper screw on the viewfinder.
2.
Attach the microphone to the attachment guide on the
viewfinder as illustrated.
3.
Confirm that there is no gap between the microphone and
the viewfinder, and then tighten the stopper screw.
4.
Tighten the microphone screw. The microphone should be
firmly attached.
5.
Connect the cable from the microphone to the AUDIO IN
FRONT connector on the front section of the camera.
6.
Secure the microphone cable using the cable clamp located
on the front of the camera.
3-4
Attaching the Microphone (provided)
3-5
Attaching the Microphone (optional)
Provided Microphone
With the optional KA-A50 microphone holder, the optional
microphones MV-P615 (Phantom microphone) can be used.
±
Attaching the Microphone with KA-A50
1.
Secure the microphone holder with 2 screws.
2.
Turn the small knob located on the outer side of the
microphone holder anticlockwise to loosen it, and loosen
the large knob located on the inner side in the same way.
Rotate the large knob fully anticlockwise to open the holder.
3.
Attach the microphone to the microphone holder so that
the microphone does not interfere with the cassette cover.
4.
Set the microphone holder so that the height is level, and
tighten the inside and outside knobs to secure the
microphone.
5.
Connect the microphone cable to the AUDIO IN FRONT
connector.
6.
Secure the microphone cable using the cable clamp located
on the front of the camera.
7.
Make sure to perform the correct settings for use of a
phantom microphone.
•
When the light mounted on the camera is used at the
same time, if the microphone in use has a long sound
collecting section (ultra-directional type, etc.), the
microphone's shadow may influence the image.
When this microphone is attached, the range that the
viewfinder can be moved to the left will be reduced. Please
purchase a separately sold microphone if you prefer to
observe through the viewfinder using your left eye.
CAUTION:
KA-A50
Microphone holder
2.
4.
1.3.
5.