JVC GY-DV550E Instruction Manual - Page 83
SETUP Screen
View all JVC GY-DV550E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
12-10 SETUP Screen 12. SETUP MENU Item 26 PIN OUT Function, Operation Variation Range Initial Setting Other than composite signals, another type of video signals can be outputted from the VTR/RM multi-pin connector. The other output video signal is selected here. Y/C : Outputs Y/C separate signals. RGB : Outputs RGB signals. CPN : Outputs component video signals. Y/C RGB CPN CPN CHARACTER MIX For selecting whether to mix characters in the MONITOR OUT video. OFF : No characters are displayed ON : Character-mixed display OFF ON SET UP For selecting whether to include setup signals in the camera images, external input video or VCR playback video signals. OFF : Setup signals are not included. ON : Setup signals are included. (Setup level: 7.5%) OFF ON OFF ON H PHASE For adjusting the horizontal phase of the unit in relation to the signal 0 128 (external sync signal) input through the GENLOCK/AUX IN connector on to the left side of the unit. 255 Delaying the horizontal phase of the unit in relation to the external sync signal . Increase the number Speeding up the horizontal phase of the unit in relation to the external sync signal . Decrease the number ∗ Adjustment is not possible if the external sync signal is not input. Possible values are indicated by - - -. SC COARSE For roughly adjusting the unit's sub-carrier (SC) phase against signals 0 0 (external synchronous signals) inputted to the GENLOCK/AUX IN terminal 90 on the left side of the unit. 180 (0°, 90°, 180°, 270°) 270 ∗ Adjustment is not possible if the external sync signal is not input. Possible values are indicated by - - -. SC FINE For fine adjusting the sub-carrier (SC) of the unit in relation to the signal 0 128 (external sync signal) input through the GENLOCK/AUX IN connector on to the left side of the unit. 255 Rotating the sub-carrier clockwise in relation to the external sync signal Increase the number Rotating the sub-carrier anticlockwise in relation to the external sync signal Decrease the number ∗ Adjustment is not possible if the external sync signal is not input. Possible values are indicated by - - -. PAGE BACK The CAMERA MENU returns when the SHUTTER dial is pressed with - - the cursor at this position. 83