JVC GY-DV550E Instruction Manual - Page 45
Viewfinder Adjustment, External Monitor Adjustment
View all JVC GY-DV550E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING 6-3 Viewfinder Adjustment 1. Eyepiece 1. 2. Eyepiece focusing ring 1. 3. 3. CONT BRIGHT 1. Adjust the position and angle of the viewfinder. 2. Diopter adjustment Rotate the eyepiece focusing ring until the viewfinder screen image is clearly visible. 3. Brightness and contrast adjustment When the ambient brightness changes, etc., the brightness and contrast of the viewfinder screen can be adjusted with the BRIGHT and CONT controls. Memo: The screen size of the viewfinder can be changed by selecting ASPECT RATIO (4:3 or 16:9 aspect ratio screen) in the OPERATION MENU screen. 6-4 External Monitor Adjustment PUSH 1. VTR/RM DV CAMCORDER GY-DV550 3.~8. PROMPTER OUTPUT Y/C OUT MONITOR OUT LINE OUT CH-1 CH-2 TC IN TC OUT REMOTE AUTO IRIS 2. FULL AUTO BLACK BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS LOLUX VTR GAIN OUTPUT WHT.BAL NG OPERATE ON OFF SMTPE type color bars Display the camera built-in color bar signal on the video monitor and adjust the colors, contrast and brightness. 1. Connect a color video monitor to the MONITOR OUT connector of the GY-DV550. 2. Set the OUTPUT switch to BARS to output the color bar signal (SMTPE type color bars). GENLOCK/AUX IN VIDEO OUT 3. Set the monitor's BLUE CHECK function to ON so that the AUDIOI screen turns entirely blue. FRONT LENS 4. Adjust the CHROMA control of the monitor so that there is no difference in brightness between the color bars 1 and 8, 7 and D. 5. With the BLUE CHECK function ON, adjust the PHASE control of the monitor so that there is no difference in brightness between the color bars 3 and 0, 5 and B. 6. If the phase control adjustment above causes a difference in brightness between the color bars 1 and 8, 7 and D, start again from the CHROMA control adjustment in step 4. 7. Set the monitor's BLUE CHECK function to OFF to switch the monitor back to the standard screen (R, G and B will all appear). 8. Use the monitor's brightness control to adjust so that the color bars H and I disappear but J is visible. White Yellow Cyan Green Magenta Red Blue 1234 Blue Black Magenta Black 890A Black E White F Black G 5 67 Cyan B Black C White D HIJ K The color bar screen has a configuration as shown above. The description hereinafter refers to the positions in the color bar screen using the numbers. 45