JVC V685U Instructions - Page 15
VN-V686WPBU, Alarm Input/Alarm Output Cable x8
View all JVC V685U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
VN-V686WPBU Ⅵ Front side A B C Ⅵ Inner structure of the camera L K D I J E A F H G A Camera securing hole (4 locations) This hole is used for mounting the camera on the wall. B Cable connecting hole, cap Remove the cap and pull out the cables from this hole for connection. (A Page 27) C Fall Prevention Wire Connects the camera to the wall. Secure the camera tightly to the anchor bolts used to mount the fall prevention wire on the wall. (A Page 28) D AC 24 V Power Cable This connects the camera to AC 24 V power. (A Page 30) E Alarm Input/Alarm Output Cable (x8) This cable is for alarm input and alarm output. (A Page 25) Cable color Brown Red Orange Yellow Green Blue Purple Gray Signal Name Input 1 Input 1 COM Input 2 Input 2 COM Output 1 Output 1 COM Output 2 Output 2 COM F LAN Cable This connects the unit to the network. (A Page 24) G Dome Cover The dome cover is a delicate object. Handle it with care. Note: ● It is covered with a protective sheet during shipment. Do not remove this sheet until installation is complete. H Dome Cover Fixing Screws (x4) I Heater ON/OFF Switch This is the automatic control ON/OFF switch of the built-in heater. The built-in heater prevents the dome cover from fogging up and snow or frost from attaching to the dome cover. When installing the heater at an unrequired location, turn off the switch of the heater. It is usually set to ON. (A Page 26) J Lens Lens cannot be replaced. K Front Mask L [MAC address] indication The MAC address is a unique physical address of the product. This address cannot be altered. 15