JVC V685U Instructions - Page 81
Protocol VISIP Protocol, AMX Device, Discovery, Protocol, Setting value:On, Off]
View all JVC V685U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Protocol Page This page is for changing the HTTP server port number. This page can be used during access using AadminB. ● Click [Advanced Settings] to display setting menu. ● Click [Protocol]. Press the [OK] button to enable the new settings. ● Press the [OK] button to enable the new settings. ● After changing, you will need to re-establish the connection if you are using the Internet Explorer. A B C D Click A HTTP Server Port You can change the port number for the built-in web server of the camera. (1-65535) The default port number setting is A80B. The port number of JPEG/MPEG4 server is changed also. To access to camera from the Internet Explorer, enter the following in the Internet Explorer when the camera is in its default settings. http://192.168.0.2 If the port number is changed to A8080B, for example, enter the Internet Explorer as follows. http://192.168.0.2:8080 B VISIP Protocol You can change the On/Off setting of VSIP Protocol. To use this unit from Nextiva of Verint Systems Inc., select AOnB. C HTTP Server Port You can change the port number for Built-in VSIP server of the camera. (1-65535) The default port number setting is A5510B. D AMX Device Discovery Protocol You can change the On/Off setting of AMX device detection protocol. Set to AOnB when you are using the camera on AMX's systems. [Setting value:On , Off] Memo: ● If Built-in Viewer is used for playback, change the [HTTP Port] number in the setting screen of Builtin Viewer to the same value. (A Page 119)(A Page 121) 81