JVC V685U Instructions - Page 68
PTZ continued, Restart Time
View all JVC V685U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Setting Using Internet Explorer Setting (continued) PTZ Page (continued) B Auto Tracking/ Intelligent Tracking (continued) Memo: ● Intelligent tracking cannot begin under the following conditions. ● [B/W Mode] is set to ABlack & WhiteB (A Page 55) ● [B/W Mode] is set to AAutoB and black and white is selected (A Page 55) ● [Auto Flip] is set to ADigital FlipB (A Page 71) ● All areas of detected motion are masked (A Page 76) ● The zoom ratio exceeds 20x. (The zoom ratio of the home position exceeds 20x if Intelligent Tracking is started by Auto Return.) ● Dark images can be improved with the [Sense Up] (A Page 54) function but the tracking may be slow. Note: ● The Auto Tracking function of this camera detects changes in brightness. As such, depending on changes in the illumination, it may or may not detect movement of objects having the same color as the background color. It may be difficult to detect objects with very slow movement. Check the operating conditions thoroughly beforehand and configure the settings such that there will not be any misoperation or omission of detection. ● When [Stabilizer] (A Page 53) is set to AOFFB, this function starts from home position and initial detect area is the screen of the home position without enlargement. When [Stabilizer] is set to AONB, as the screen is enlarged, it will also respond to motion of image which is not shown on the screen. This is the specification of this unit, not a malfunction. Restart Time Auto Tracking : This item sets the duration to return to the home position when there is no movement in the images after auto tracking starts. Intelligent Tracking : When Intelligent Tracking loses the object, you can return to the home position after the preset [Restart Time] has elapsed. For Intelligent Tracking, the camera does not return to home position while the object is locked even if the object does not move. [Setting value:Off, 10seconds, 20seconds, 30seconds, 40seconds, 50seconds, 60seconds, 120seconds] Note: ● When the [Mode] item of [Auto Return]A is set to AAuto TrackingB and the [Return Time] is set shorter than the [Restart Time] for [Auto Tracking]B, the camera will operate according to the [Return Time]. Auto Tracking Level This item sets the detection sensitivity of Auto Tracking/Intelligent Tracking. To lower the sensitivity B Decrease the number To increase the sensitivity B Increase the number [Setting range:0 to 10] 68