JVC V685U Instructions - Page 31
Using PoE, What is PoE Power over Ethernet?, Cable to use
View all JVC V685U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Using PoE Supply power to the camera by connecting it to a device that supports PoE via a LAN cable. What is PoE (Power over Ethernet)? PoE is a feature that transfers data and supplies power simultaneously through a LAN cable. It enables you to operate a LANcompatible equipment without having to connect it to a power supply using a power cord. Cable to use ● Shield (STP) cable ● Length of 100 m or shorter ● Make use of a Category 5 (or higher) cable . Note: ● When power is supplied to VN-V686WPBU using PoE, the heater will not work. Use an AC 24 V power supply when using the camera in an environment under -10I. LAN Cable Connection Connect the camera to a hub or computer using a LAN cable. Cable to use ● Shield (STP) cable ● Length of 100 m or shorter ● Make use of a Category 5 (or higher) cable . ⅷ When connecting to a hub Make use of a straight cable. ⅷ When connecting to a computer Make use of a cross cable. RJ-45 conversion connector (provided) RJ-45 conversion connector (provided) Note: ● However, cross cables cannot be used with some computer models. When connecting the camera directly to a computer, check the computer's LAN specifications in advance. 31