JVC V685U Instructions - Page 71
Preset Position, Speed, Setting value:1 to 4], Auto Flip, Digital Flip, Mode1, Mode3]
View all JVC V685U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
E Preset Position Speed Speed F Auto Flip This item sets the speed of moving to the preset position. It is also applicable when moving to the preset position in Auto Patrol. [Setting value:1 to 4] Set this item when shooting objects that pass right under the camera. Otherwise, following operations are necessary to shoot objects that pass right under the camera. ATurn the camera to face down BRotate the camera 180 ° horizontally CTurn the camera to face up You can use the [Auto Flip] function to perform the above operations automatically. Off : Auto Flip function does not activate. Digital Flip : The top/bottom and left/right of the image flips when tilt position passed the angle of 135 degrees. Mode1 : When the camera faces bottom, it rotates 180 ° horizontally and stops. In this case, the operating direction of the camera is the same as that of the Pan/Tilt operation. Mode2 : When the camera faces bottom, it rotates 180 ° horizontally and the operating direction of the camera is opposite that of the Tilt operation. Select this mode if you wish to operate continuously. Once operation stops, the direction will return to normal. Mode3 : When the camera faces bottom, it rotates 180 ° horizontally and the operating direction of the camera is opposite that of the Tilt operation. However, the operating direction will return to normal 10 seconds after the operation has stopped. [Setting value:Off, Digital Flip, Mode1, Mode2, Mode3] Memo: ● [Intelligent Tracking] is disabled when this is set to ADigital FlipB. (A Page 67) ● Settings for [Preset Position Speed] are reflected in the rotation speed when images are flipped using AMode1B, AMode2B, AMode3B. To flip images in high speed using AMode1B, AMode2B, AMode3B, set the [Speed] in [Preset Position Speed] to A4B. Note: ● When [Auto Flip] is set to other than AOffB, the camera can be moved to areas outside the pan limit with the Tilt operation. When ADigital FlipB is set, use the Tilt operation to flip and return to the pan limit area again. When AMode1B, AMode2B or AMode3B is set and the camera is moved to inside of the pan limit with Pan operation, it will stop at the pan limit position. 71