JVC V685U Instructions - Page 36
IP Address Settings, IP address setting procedure, Network SettingNetwork Setting
View all JVC V685U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Network SettingNetwork Setting IP Address Settings IP address setting procedure Follow the procedure below to configure the IP address of the camera. Step1 IP address setting at the computer (APager37) Set the IP address of the computer for configuring the camera settings. G Step2 Internet Explorer settings (APager38) Configure the Internet Explorer settings in order to establish connection between the computer and the camera. G Step3 Connecting the camera to the computer (APager40) Connect the computer to the camera. G Step4 IP address setting for the camera (APager42) Set the [DHCP Disable] item on the [Basic Settings1] screen to ADHCP EnableB or ADHCP EnableB. ⅷ System configuration required for setting IP address Camera at factory default is set to ADHCP EnableB (DHCP client function is On). When it is connected to a LAN without DHCP servers, it will activate under the following IP address after timeout. IP address Subnet mask Default gateway : 192.168.0.2 : 255.255.255.0 : None Memo: ● To set a static IP address for the camera, connect the camera, the switching hub and the computer for setting using a straight LAN cable of Category 5 and above. ⅷ Set up the computer for setting the IP address. ● Minimum computer specifications for setting OS : Windows XP (Professional or Home Edition) (SP2) Web browser : Internet Explorer Version 6.0 Note: ● When setting the IP address of the camera, do so by using a network that is made up of only the camera, the computer for setting and the switching hub. ● Using a hub connected to other network devices or networks via a LAN cable for setting can cause problems. 36