JVC V685U Instructions - Page 80
Network Details TOSDS field, MPEG4, Common, TTL Unicast, Setting range:1280 to 1500]
View all JVC V685U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Setting Using Internet Explorer Setting (continued) Network Details Page This page is for performing detailed network setting. This page can be used during access using AadminB. ● Click [Advanced Settings] to display setting menu. ● Click [Network Details]. Press the [OK] button to enable the new settings. ● Press the [OK] button to enable the new settings. ● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value. A B C D E Click F JPEG A TOS(DS field) MPEG4 B TOS(DS field) Common C TTL (Unicast) D TTL (Multicast) E MTU F Negotiation For setting the TOS value of IP packets in which JPEG is stored. The upper six bits out of the eight bits that make up the TOS value belong to DSCP. This upper six bits can be set. The lower two bits are A0B. For example, upon setting to A255B, the lower two bits are converted to A0B, and the value becomes A252B. TOS values are used in networks that support QoS. By setting QoS for the network switch, routing can be done by giving priority to packets with a larger TOS value. For setting the TOS value of IP packets in which MPEG4 is stored. For details, refer to the [JPEG TOS(DS field)] item A above. For setting the TTL value of JPEG/MPEG4 packets that are to be sent via TCP. For setting the TTL value of JPEG/MPEG4 packets that are to be sent via multicast. For setting the maximum packet size for storing JPEG/MPEG4. [Setting range:1280 to 1500] For setting the [Negotiation] of the [Network Details]. When a value other than AAutoB is selected, do not set the network device to be connected to AAutoB. Ensure that it is set to the same value as the camera. 80