JVC V685U Instructions - Page 95
Operation Operation, Total Sending, Bitrate, Destination, System Log
![]() |
View all JVC V685U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Operation Page Displays the operating status of the camera. This page can be used during access using AadminB or AoperatorB. ● Click [Advanced Settings] to display setting menu. ● Click [Operation]. Press the [OK] button to enable the new settings. A B C Click Operation A Total Sending Bitrate B Destination Log C System Log Displays the total TCP/UDP bit rate sent by the camera as well as the individual bit rates. Displays the destination that the camera is sending data to. Displays the following information. ● Number of seconds after startup ● Alarm information 95
![](/manual_guide/products/jvc-vnv686bu-instructions-641ab91/95.png)
95
Operation Page
Displays the operating status of the camera.
This page can be used during access using
A
admin
B
or
A
operator
B
.
●
Click [Advanced Settings] to display setting menu.
●
Click [Operation]. Press the [OK] button to enable the new settings.
A
B
C
Click
Operation
A
Total Sending
Bitrate
Displays the total TCP/UDP bit rate sent by the camera as well as the
individual bit rates.
B
Destination
Displays the destination that the camera is sending data to.
Log
C
System Log
Displays the following information.
●
Number of seconds after startup
●
Alarm information