Kenmore 7930 Use and Care Guide - Page 14

> some, modesl

Get Kenmore 7930 - 22.0 cu. Ft. Top Freezer Refrigerator PDF manuals and user guides View all Kenmore 7930 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

2. Replace the shelf by guiding it back into the slots on the frame and pushing the shelf in past the stop. Shelves and Shelf Frames To remove and replace a shelf/frame: 1. Remove the shelf/frame by tilting it up at the front and lifting it out of the shelf supports. 2. Replace the shelf/frame by guiding the rear shelf hooks into the shelf supports. Tilt the front of the shelf up until rear shelf hooks drop into the shelf supports. Check to make sure that the shelf is securely in position. To remove and replace the shelf track: 1. Remove the shelf track by lifting both sides of the track slightly and pulling the track straight out. 2. Replace the track by guiding the track hooks into the shelf support slots on the back wall. NOTE: Make sure that both sets of track hooks are in the slots and that the slots are parallel with each other. 3. Push the track back and down securely into the shelf supports. To replace the shelf: NOTE: Make sure that both of the rear shelf slides are securely in the track before letting go of the shelf. The lateral shelf may be difficult to install if the track is placed too close to the refrigerator ceiling. Reposition the track on a lower rung until the shelf can be tilted enough to easily slide into the track. 1. Hold the shelf at the front and tip the front at a 45 ° angle to the track. 2. Insert both of the rear shelf slides into the upper channel of the track, and lower the front of the shelf into place. . some modesl To slide the shelf from side to side, lift up on the front of shelf and slide to the desired location. Lower shelf to the level position. NOTE: You do not have to remove small items from the shelf before moving it from side to side. You may need to remove larger items. (Os some s"_ode s} Drawers To remove and replace a drawer: 1. Slide drawer straight out to the stop, Lift the front of the drawer and slide it out the rest of the way. 2. Replace a drawer by sliding it back in fully past the stop. Crisper Cover To remove the crisper(s} cover: 1. Remove crisper(s). Hold the glass insert firmly with one hand and press up in the center of the glass insert until it rises above the plastic frame. Carefully slide the glass insert forward to remove. 2. Lift the cover frame and remove it. To remove the shelf: NOTE: The shelf is heavy and must be removed using both hands. 1. Hold the back of the shelf with one hand. 2. Lift the front of the shelf with the other hand to a 45 ° angle and lower it slightly to release it from the upper channel of the track. Pull the shelf straight out. To replace the crisper cover: NOTE: Before reinstalling the cover, make sure the U-shaped reinforcement bar is reinstalled in the front edge of the crisper cover. 1. Fit back of cover frame into supports on side walls of the refrigerator and lower the front of the cover frame into place. 2. Slide rear of glass insert into cover frame and lower front into place. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
2.
Replace the shelf by guiding
it back into the slots on the
frame and pushing
the shelf in past the stop.
Shelves
and
Shelf Frames
To
remove
and
replace
a shelf/frame:
1.
Remove the shelf/frame
by
tilting it
up at
the
front and
lifting it
out of the shelf supports.
2.
Replace the shelf/frame
by guiding
the rear shelf hooks into
the shelf supports.
Tilt the front of the shelf up until rear shelf
hooks drop into the shelf supports.
Check to make sure that
the shelf is securely
in position.
.
<_D/¢/_;;JI:
_> some
modesl
To slide the shelf from side to side, lift up on the front of shelf and
slide to the desired location.
Lower shelf to the level position.
NOTE: You do not have to remove small items from the shelf
before moving
it from side to side. You may need to remove
larger
items.
To remove
the shelf:
NOTE:
The shelf is heavy and must be removed
using both
hands.
1.
Hold the back of the shelf with
one hand.
2.
Lift the front of the shelf with the other hand to a 45 ° angle
and lower it slightly to release it from the upper channel
of the
track. Pull the shelf straight
out.
To remove
and replace
the shelf track:
1.
Remove
the shelf track by
lifting
both sides of the track
slightly
and pulling
the track straight
out.
2.
Replace the track
by guiding the track hooks
into the shelf
support
slots on the back wall.
NOTE:
Make sure that both sets of track hooks are in the
slots and that the slots are parallel with each other.
3.
Push the track back and down securely
into the shelf
supports.
To
replace
the
shelf:
NOTE:
Make sure that both of the rear shelf slides are securely
in
the track before letting go of the shelf. The lateral shelf may be
difficult
to install if the track is placed too close to the refrigerator
ceiling.
Reposition
the track on a lower rung until the shelf can be
tilted enough
to easily slide into the track.
1.
Hold the shelf at the front
and tip the front at a 45° angle to
the track.
2.
Insert both of the rear shelf slides into the upper channel
of
the track, and lower the front of the shelf into place.
(Os some
s"_ode s}
Drawers
To
remove
and
replace
a
drawer:
1.
Slide
drawer
straight out
to the
stop, Lift
the front
of
the
drawer and slide it out the rest of the way.
2.
Replace a drawer by sliding
it back in fully past the stop.
Crisper
Cover
To
remove
the crisper(s}
cover:
1.
Remove
crisper(s).
Hold the glass insert firmly with
one hand
and press up in the center of the glass insert until it rises
above the plastic frame. Carefully slide the glass insert
forward
to remove.
2.
Lift the cover frame and remove
it.
To replace
the crisper
cover:
NOTE: Before reinstalling
the cover, make sure the U-shaped
reinforcement
bar is reinstalled
in the front edge of the crisper
cover.
1.
Fit back of cover frame into supports
on side walls of the
refrigerator
and lower the front of the cover frame into place.
2.
Slide rear of glass insert into cover frame and lower front
into
place.
14