Konica Minolta bizhub 215 bizhub 215 Print Operations User Guide - Page 23
Manual installation using the Add Printer Wizard
View all Konica Minolta bizhub 215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3.4 Manual installation using the Add Printer Wizard 3 3.4 Manual installation using the Add Printer Wizard 3.4.1 Windows Vista/7/Server 2008/Server 2008 R2 This chapter describes the procedure for installing the Windows printer driver using the standard Windows Add Printer function, without using the installer. For network connection (LPR/Port 9100) In Windows Vista/7/Server 2008/Server 2008 R2, you can install the printer driver either by searching for the printer on the network, or by creating a new printer port. Settings for the machine To use Port 9100 or LPR printing, you must configure the network settings for the machine in advance. Items to be configured IP address RAW port number LPD Setting Description In [NETWORK SETTING] on the Control Panel of this machine, specify the IP address. To use Port 9100 printing: In [IPv4 Configuration] for the machine, enable the RAW port number (initial setting: [9100]). To use LPR printing: From [TCP/IP Configuration] - [LPD Setting] for the machine, enable LPD printing. d Reference For details on the network settings of this machine, refer to "Network settings" and PageScope Web Connection - [Network] - [TCP/IP Configuration] and [Network]-[IPv4 Configuration] of [User's Guide Network Administrator]. Installing the printer driver by searching for the printer using the Add Printer Wizard. 0 Administrator authority is required for installation. 0 Since the printer is searched for during the installation, be sure to connect this machine to the network before turning it on. 1 Insert the printer driver CD-ROM into the CD-ROM drive of the computer. % The required CD-ROM varies depending on the printer driver. Select the CD-ROM corresponding to the printer driver used. 2 Click [Start], then [Control Panel]. 3 Select the desired printer function in [Hardware and Sound]. % In Windows Vista/Server 2008, click [Printers] under [Hardware and Sound]. If [Control Panel] is displayed in Classic View, double-click [Printers]. % In Windows 7/Server 2008 R2, click [View devices and printers] under [Hardware and Sound]. If [Control Panel] appears in the icon display, double-click [Devices and Printers]. 4 On the toolbar, click the additional functions of the printer. % Click [Add a printer] on the toolbar. The [Add Printer] wizard appears. 5 Click [Add a network, wireless or Bluetooth printer]. Connected printers are detected. % If no printer is detected, turn this machine off, then on again. In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again. If you turn this machine on immediately after turning it off, it may not function correctly. bizhub 215 3-7