Konica Minolta bizhub C654 bizhub C654/C754 Troubleshooting User Guide - Page 27
When Printing Quality Has Deteriorated, 3.1 Cleaning the Electrostatic Charger Wire
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3.1 Cleaning the Electrostatic Charger Wire 3 3 When Printing Quality Has Deteriorated 3.1 Cleaning the Electrostatic Charger Wire If the Electrostatic Charger Wire is dirty, linear smudges may appear on a print image. If this occurs, clean the Electrostatic Charger Wire according to the following procedure. 1 Open the Lower Front Door of the machine. 2 Carefully pull out the Charger Cleaner towards yourself up to the position at which it stops. Then, carefully press it against the back side. Repeat the steps above three times. 3 Securely press the Charger Cleaner, and close the Lower Front Door of the machine. bizhub C754/C654 3-2
bizhub C754/C654
3-2
3.1
Cleaning the Electrostatic Charger Wire
3
3
When Printing Quality Has Deteriorated
3.1
Cleaning the Electrostatic Charger Wire
If the
Electrostatic Charger Wire
is dirty, linear smudges may appear on a print image. If this occurs, clean
the
Electrostatic Charger Wire
according to the following procedure.
1
Open the
Lower Front Door
of the machine.
2
Carefully pull out the
Charger Cleaner
towards yourself up to
the position at which it stops. Then, carefully press it against
the back side.
Repeat the steps above three times.
3
Securely press the
Charger Cleaner
, and close the
Lower Front Door
of the machine.