Konica Minolta bizhub C654 bizhub C654/C754 Troubleshooting User Guide - Page 40
Cannot print, Finisher, Punch, Description of problem, Check points, Remedy
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
6.1 Cannot print 6 Description of problem Cannot specify the punch function. Check points The optional Finisher and Punch Kit are required. If the booklet, transparency or envelope is specified, the punch function is not available. Cannot punch. The punch position is not as expected. Is the paper that has been loaded into the paper tray in the correct orientation? Is the stapling position or original orientation appropriate? The overlay is not printed properly. Paper is not fed from the specified paper tray. Is there sufficient available computer memory? Does the specified paper tray contain paper of the right size/orientation? Remedy Install the required optional product and enable them on the printer driver. Check the setting of each item of the printer driver. For information on paper types supported by the punch function, refer to [User's Guide: About This Machine]. Check the orientation of the paper in the paper tray. Check the punching position in the printer driver settings. For information on how to configure the punch settings, refer to [User's Guide: Print Operations]. For the original orientation setting, refer to [User's Guide: Print Operations]. Simplify the overlay to reduce the data volume. Load paper of the appropriate size and orientation into the paper tray. bizhub C754/C654 6-6