Konica Minolta bizhub C654 bizhub C654/C754 Troubleshooting User Guide - Page 68
Main messages and remedies, Enter Account Name and Pass
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
9.2 Main messages and remedies 9 9.2 Main messages and remedies Message [Originals left on glass.] [Paper of matching size is not available.Select the paper size.] [Load paper into bypass Tray.] [The original size cannot be detected. Select the paper size.] [The image will not fit in the selected paper size. Position the original in a different orientation.] [The output tray has reached its capacity. Remove paper from the tray indicated by .] [Enter a login User Name and Password, and then touch [Login] or press [ID].] [Enter Account Name and Password, and then touch [Login] or press the [ID] key.] [The counter for the account has reached its maximum allowance.] [The part indicated by is open. Ensure that it is property closed.] [Install Toner Cartridge.] [Replenish Paper.] [Toner is low. Replace when indicated.] [Replace Toner Cartridge.] [Toner has been depleted. Replaced the Toner Cartridge according to the instructions.] [No more staples. Replace the Staple Cartridge or cancel stapling.] [Misfeed detected. Remove paper according to the instructions.] Cause The original has been left on the Original Glass. Paper of a suitable size is not loaded in a paper tray. Paper of a suitable size is not loaded in the Bypass Tray. (1) The original is not loaded correctly. (2) The original is a custom size or a small size that cannot be detected. The image will be cut off with the current orientation of the original. Copying failed as the Output Tray of the Finisher/Job Separator marked with has reached its capacity. User authentication is enabled. You must enter your user name and correct password to perform copying. Account track settings have been configured. You must enter your account name and correct password to perform copying. There is a limit to the number of pages that can be printed by account. Copying failed as the door or cover of this machine is open or the optional device is not securely closed. The Toner Cartridge is not installed correctly. The indicated tray has run out of paper. The toner is about to run out. The toner is about to run out. Toner is depleted. The staples have run out. Copying cannot be performed due to a paper jam. Remedy Remove the original from the Original Glass. Either select paper of a different size or load paper of a suitable size. Load paper of the appropriate size into the Bypass Tray. (1) Position the original correctly. (2) Select the paper size and start copying. Rotate the original by 90 degrees to load it correctly. Remove all paper from the tray marked with . Enter your user name and correct password. Enter the account name and correct password. Contact the administrator of the machine. Be sure to securely close the door or cover of this machine that is marked with , and the door or cover of the optional device. Reinstall each consumable and replaceable part. Otherwise, contact your service representative. Add paper into the indicated tray. According to the maintenance agreement, prepare a spare Toner Cartridge. According to the maintenance agreement, replace the indicated Toner Cartridge. According to the maintenance agreement, replace the indicated Toner Cartridge. Replace the Staple Cartridge. Follow the guidance (instructions) to remove jammed paper. bizhub C754/C654 9-5