Kyocera ECOSYS FS-1135MFP FS-1035MFP/DP/1135MFP Operation GuideRev-1.2011.11 - Page 210

Default Setting (System Menu) Media Type Set Useable paper types and print densities can be set on the machine for printing. In addition to pre-selected paper, custom paper can be selected and the weight and print density can be defined. A paper type can be defined from the operation panel. Useable paper types, factory-set paper weights, and factory-set print densities are shown below. A paper weight and print density can be changed as needed. IMPORTANT: When a paper weight and print density are changed, toner fusing problems may cause flaws in the printed image. Paper Type Paper source Default display in the operation panel MP tray Paper Cassette Paper Weight Print Density Duplex path Plain Yes Yes Normal2 Normal Yes Transparency Yes No Extra Heavy Normal No Preprinted Yes Yes Normal2 Normal Yes Labels Yes No Heavy1 Normal No Bond Yes Yes Normal3 Normal Yes Recycled Yes Yes Normal2 Normal Yes Vellum Yes No Light Normal No Rough Yes Yes Normal3 Normal Yes Letterhead Yes Yes Normal3 Normal No Color Yes Yes Normal3 Normal Yes Prepunched Yes Yes Normal2 Normal Yes Envelope Yes No Heavy3 Normal No Cardstock Yes No Heavy3 Normal No Thick Yes No Heavy3 Normal No High quality Yes Yes Normal2 Normal Yes Custom 1 (to 8)* Yes Yes Normal2 Normal Yes Yes: Can be stored No: Cannot be stored * This is a paper type defined and registered by the user. Up to eight types of user settings may be defined. User can also enable or disable the duplex path when using Custom. For Custom 1-8, settings for duplex printing and media type name can be changed. Item Duplex Prohibit Permit Name Description Duplex printing not allowed. Duplex printing allowed. Change names for Custom 1-8. Names should be not more than 16 characters. Selecting media type at multi purpose tray, the name after change will be displayed. Use the procedure below to set the media type setting. 8-16