Kyocera ECOSYS FS-1135MFP FS-1035MFP/DP/1135MFP Operation GuideRev-1.2011.11 - Page 337

Default Setting (System Menu) POP3 Security Select the communication protocol according to the type of security employed by the POP3 server. The default setting is Off. NOTE: POP3 (E-mail RX) must be set to On in Protocol Detail on page 8-132. The table below shows the available settings. Item Off SSL/TLS STARTTLS Description Do not use security employed by the POP3 server. Encryption is applied any data communication. To enable POP3 security, the POP3 port may have to be changed according to the server settings. Typically, 995* for SSL/TLS is well-known POP3 port. Encryption is applied any data communication. Typically, 110* for STARTTLS is well-known POP3 port. * You can change the port number using COMMAND CENTER. 8 Use the procedure below to make the setting. Sys. Menu/Count.:a b 1 Report 2 Counter *3 **S*y*s*t*e*m [ Exit ] 1 In the Sys. Menu/Count. menu, press the U or V key to select [System], and press the OK key. Login User Name: L b Login Password: A login screen will appear. Then, enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). [ Login ] System: a b *1**N*e*t*w*o*r*k**S*e*t*t*i*n*g**** 2 I/F Block Set. 3 Security Level [ Exit ] 2 The System menu appears. Network Setting: a b *7**S*e*c*u*r*e**P*r*o*t*o*c*o*l**** 8 Host Name 9 LAN Interface [ Exit ] 3 Press the U or V key to select [Network Setting]. 4 Press the OK key. The Network Setting menu appears. 8-143