Kyocera ECOSYS FS-1135MFP FS-1035MFP/DP/1135MFP Operation GuideRev-1.2011.11 - Page 361
Error Message, Installed. PC - error code 2202
View all Kyocera ECOSYS FS-1135MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 361 highlights
Troubleshooting Error Message Send error. #### Check Points The developer unit is Is the developer unit not installed. installed correctly? The phone receiver is - off the hook. Hang Up. Toner is running out. - Unknown toner Installed. PC Does the installed toner container's regional specification match the machines's? USB memory error. - Job is canceled. Corrective Actions Reference Page 2101, 2102, 2103, 2201, 2202, 2203, 3101: The network cable is disconnected or the hub that it is connected to is not operating properly. Check the cable and the hub. Otherwise, the server name or the host name of the SMTP server is not set correctly. Use COMMAND CENTER and register the SMTP server name and the host name correctly. 2204: The E-mail size exceeds the acceptable send data capacity. Decrease the size or resolution of the scanned data to be transmitted and - resend the E-mail. 5101, 5102, 5103, 5104, 7102, 720f: Turn the power switch off and back on. If this error occurs several times, make a note of the displayed error code and contact your service representative.(Refer to the corrective action for the error message " An error has occurred.") 9181: The scanned original exceeds the acceptable number of pages of 999. Send the excess pages separately. Contact your service technician. - Put down the receiver. - Prepare the toner container. 9-5 Install the specified container. 9-5 This job is canceled. Press the OK - key. 10 10-11