Kyocera ECOSYS FS-1135MFP FS-1035MFP/DP/1135MFP Operation GuideRev-1.2011.11 - Page 62
COMMAND CENTER (Settings for E-mail), Preparation before Use, FAX Operation Guide
View all Kyocera ECOSYS FS-1135MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Preparation before Use COMMAND CENTER (Settings for E-mail) COMMAND CENTER is a tool used for tasks such as verifying the operating status of the machine and changing the settings for security, network printing, E-mail transmission and advanced networking. NOTE: Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the FAX Operation Guide. FAX functions available only on products with the fax function installed. The procedure for accessing COMMAND CENTER is explained below. 1 Launch your Web browser. 2 In the Address or Location bar, enter the machine's IP address. E.g.) http://192.168.48.21/ The web page displays basic information about the machine and COMMAND CENTER as well as their current status. 3 Select a category from the navigation bar on the left of the screen. The values for each category must be set separately. Enter the correct password to access pages other than the startup page. The default setting is admin00. The password can be changed. For details, refer to the KYOCERA COMMAND CENTER Operation Guide. 2-26