Kyocera ECOSYS FS-1135MFP FS-1035MFP/DP/1135MFP Operation GuideRev-1.2011.11 - Page 358

Troubleshooting Error Message Check Points Corrective Actions Reference Page Load paper in MP Tray. Machine failure. Call service. Is the paper of the selected size loaded in the multi purpose tray? - Load the paper in the multi purpose tray which is of the size and type indicated on the Message Display. 2-43 Internal error has occurred. Make a - note of the error code displayed on the Message Display. Turn off the machine, unplug the power cord, and contact your Service Representative. Maximum Number of scanned pages. Job is canceled. Memory is full. Job is canceled. Memory is full. Print job cannot be processed completely. Non-genuine Toner. Press [Help]. Is Error code "C4200" displayed? Internal condensation has occurred - as a result of a sudden change in temperature. Turn off the machine and let stand for 30 to 90 minutes, and then back on again. If this message still remains, turn off the machine, unplug the power cord, and contact your Service Representative. - Scanning cannot be performed due - to insufficient memory of scanner. The job is canceled. Press the OK key. Is the acceptable scanning Press the OK key to print, send or - count exceeded? store the scanned pages. Press the Stop key to cancel printing, sending or storing. - The job is canceled. Press the OK - key. - Unable to continue the job as the - memory is used up. Press the OK key to print the scanned pages. The print job cannot be processed completely. Press the Stop key to cancel the job. This message is displayed if The manufacturer assumes no 9-5 the installed toner container responsibility for damage caused by is non-genuine. a non-genuine toner. We recommend that you only use genuine toner containers. When you want to use the toner container currently installed, press the OK key and Stop key simultaneously for 3 seconds or more. 10-8