Kyocera ECOSYS M5521cdw ECOSYS M5521cdn/M5521cdw Operation Guide - Page 162
Loading Paper in the Multipurpose Tray
View all Kyocera ECOSYS M5521cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Operation on the Machine > Loading Paper in the Multipurpose Tray Loading Paper in the Multipurpose Tray For details of the supported paper sizes, refer to the following: Choosing the Appropriate Paper (page 11-14) For the paper type setting, refer to the following: Media Type Setting (page 8-24) Be sure to use the multipurpose tray when you print on any special paper. IMPORTANT • If you are using a paper weight of 106 g/m2 or more, set the media type to Thick and set the weight of the paper you are using. • Remove each transparency from the inner tray as it is printed. Leaving transparencies in the inner tray may cause a paper jam. The capacity of the multipurpose tray is as follows. • Plain paper (80 g/m2) or recycled paper: 50 sheets • Thick paper (209 g/m2): 15 sheets • Thick paper (157 g/m2): 30 sheets • Thick paper (104.7 g/m2): 50 sheets • Hagaki (Cardstock): 15 sheets • Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei 4, Youkei 2: 5 sheets • OHP film: 1 sheet • Coated: 30 sheets NOTE • When you load custom size paper, enter the paper size by referring to the following: Orig./Paper Set. (page 8-20) • When you use special paper such as transparencies or thick paper, select the media type by referring to the following: MP Tray Set. (Multipurpose Tray Settings) (page 8-23) 1 Open the multipurpose tray. 5-5