Kyocera ECOSYS M5521cdw ECOSYS M5521cdn/M5521cdw Operation Guide - Page 208

Using Various Functions > Functions Combine Copy Combines 2 or 4 original sheets into 1 printed page. You can select the page layout and the type of boundary lines around the pages. The following types of the boundary lines are available. None Solid Line Dotted Line Positioning Mark Select [2 in 1] or [4 in 1], select [Detail], and configure the function. Off 2 in 1 Item 2 in 1 Layout Border Line Orig. Orientation 4 in 1 4 in 1 Layout Border Line Orig. Orientation Value ― ― L to R T to B, R to L, B to T None, Solid Line, Dotted Line, Positioning Mark Top Edge on Top, Top Edge on Left ― Right then Down, Down then Right, Left then Down, Down then Left None, Solid Line, Dotted Line, Positioning Mark Top Edge on Top, Top Edge on Left Description Disables the function. Select the [OK] key to copy the original with the default setting. For the default settings, refer to the following: Function Defaults (page 8-28) Select the page layout of scanned originals, and select the [OK] key. Select the page boundary line, and select the [OK] key. Select the orientation of the original document top edge to scan correct direction. Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then select the [OK] key. Select the [OK] key to copy the original with the default setting. For the default settings, refer to the following: Function Defaults (page 8-28) Select the page layout of scanned originals, and select the [OK] key. Select the page boundary line, and select the [OK] key. Select the orientation of the original document top edge to scan correct direction. Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then select the [OK] key. 6-13