Kyocera ECOSYS M5521cdw ECOSYS M5521cdn/M5521cdw Operation Guide - Page 176

Operation on the Machine > Sending Document to Folder on an FTP Server (Scan to FTP) 4 Enter the destination information. Enter the information for each item and select the [OK] key. Character Entry Method (page 11-8) The table below lists the items to be set. Item Host Name *1 Path*2 Data to be entered Max. characters Host name or IP address of FTP server Up to 64 characters Path to the receiving folder For example: User\ScanData Otherwise the data will be saved in the home directory. Up to 128 characters Login User Name FTP server login user name Up to 64 characters Login Password FTP server login password (Case sensitive.) Up to 64 characters *1 You can also specify the port number. Enter the following format separated by a colon. "Host name: port number" or "IP address: port number" To enter the IPv6 address, enclose the address in brackets [ ]. (Example: [2001:db8:a0b:12f0::10]:21) If the port number is not specified in [Host Name], the default port number is 21. *2 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the slash "/" not using the back-slash. 5 Check the status. The connection confirmation screen appears. Select [Yes] to check the connection and [No] to not check it. "Connected." appears when connection to the destination is correctly established. If "Cannot connect." appears, review the entry. To send to multiple destinations, repeat steps 3 to 4. Destinations can be changed later. Checking and Editing Destinations (page 5-31) 6 Select the functions. Select the [Function Menu] key to select the send functions to use. Send (page 6-4) 7 Press the [Start] key. Sending starts. 5-19