Kyocera ECOSYS M5521cdw ECOSYS M5521cdn/M5521cdw Operation Guide - Page 331
System Menu/Counter, Adjustment/Maintenance, Service Setting, Altitude, Adjustment, Adjust/Maint.
View all Kyocera ECOSYS M5521cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 331 highlights
Troubleshooting > Troubleshooting Symptom The altitude is 1000 m or ― higher and irregular horizontal white lines appear in the image. Checkpoints Corrective Actions Reference Page Select the [System Menu/Counter] key ― > [Adjustment/Maintenance] > [Service Setting] > [Altitude Adjustment], and set to an elevation one level higher than the current setting. The altitude is 1000 m or ― higher and dots appear in the image. Select the [System Menu/Counter] key ― > [Adjustment/Maintenance] > [Service Setting] > [Altitude Adjustment], and set to an elevation one level higher than the current setting. Printouts have vertical lines. Is the slit glass dirty? ― Dirt on the top edge or back Is the interior of the machine dirty? of the paper. Clean the slit glass. page 10-3 Select the [System Menu/Counter] key ― > [Adjust/Maint.] > [Service Setting] > [LaserScanner Cln], and then select [Yes]. Clean the interior of the machine. page 10-4 Part of the image is ― periodically faint or shows white lines. ― ― Open and then close the rear cover. ― Select the [System Menu/Counter] key ― > [Adjust/Maint.] > [Service Setting] > [Drum Refresh], and then select [Yes]. Select the [System Menu/Counter] key ― > [Adjust/Maint.] > [Service Setting] > [MC] and decrease the adjustment value. Decrease the adjustment value 1 level at a time from the current value. If there is no improvement after the value is decreased by 1 level, decrease by 1 level again. If there is still no improvement, return the setting to the original value. 10-14