Kyocera ECOSYS M5521cdw ECOSYS M5521cdn/M5521cdw Operation Guide - Page 93

Installing and Setting up the Machine > Command Center RX Command Center RX If the machine is connected to the network, you can configure various settings using Command Center RX. This section explains how to access Command Center RX, and how to change security settings and the host name. Command Center RX User Guide NOTE To fully access the features of the Command Center RX pages, enter the User Name and Password and click [Login]. Entering the predefined administrator password allows the user to access all pages, including Document Box, Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).) Login User Name: Admin Login Password: Admin Settings that the administrator and general users can configure in Command Center RX are as follows. Setting Description Administrator Device Information The machine's structure can be checked. Job Status Document Box*1 Displays all device information, including print and scan jobs, storing jobs, scheduled jobs, and job log history. Configures settings related to the Job Box. Address Book Create, edit, or delete addresses and address groups. Device Settings Configure the advanced settings of the machine. Function Settings Configure the advanced function settings. Network Settings Configure the network advanced settings. Security Settings Configure the security advanced settings. Management Settings Configure the advanced management settings. *1 The expansion memory or SD/SDHC memory card is required. *2 The logged in user may not be able to configure some settings, depending on the permissions of the user. General User - *2 - NOTE Here, information on the FAX settings has been omitted. FAX Operation Guide 2-45