Kyocera ECOSYS M5521cdw ECOSYS M5521cdn/M5521cdw Operation Guide - Page 296
Obtain NW User Property, Display the screen., Con the settings.
View all Kyocera ECOSYS M5521cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration Obtain NW User Property Set the required information to obtain the network user property from the LDAP server. The user name obtained with this setting is shown in the user information, the status confirmation screen, and the header of E-mail. NOTE • To obtain the network user property from the LDAP server, [Netwk Authentic.] must be selected for the authentication method in "Enabling User Login Administration". Select "On" for "LDAP" in "ProtocolSettings". Enabling User Login Administration (page 9-3) ProtocolSettings (page 8-12) • Setting to obtain network user information is performed from the operation panel. The details of the information to be obtained should be set with Command Center RX. Command Center RX User Guide 1 Display the screen. 1 [System Menu/Counter] key key > [User/Job Account] > [OK] key NOTE If the login user name entry screen appears during operations, enter a login user name and password, and select [Login]. For this, you need to login with administrator privileges. The factory default login user name and login password are set as shown below. Login User Name: 2100 Login Password: 2100 2 key > [User Login Set.] > [OK] key 2 Configure the settings key > [NW User Property] > [OK] key key > [Off] or [On] > [OK] key 9-18