Kyocera ECOSYS P8060cdn ECOSYS P8060cdn Operation Guide - Page 101
Display the screen., Con the settings., SMTP Server Name
![]() |
View all Kyocera ECOSYS P8060cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Installing and Setting up the Machine > Command Center RX 3 Display the screen. Display the E-mail Settings screen. From the [Function Settings] menu, click [E-mail]. 1 2 4 Configure the settings. Enter "SMTP" and "E-mail Send Settings" items. SMTP Setting Description Set to send e-mail from the machine. SMTP Protocol SMTP Server Name*1 Displays the SMTP protocol settings. Check that "SMTP Protocol" is set to [On]. If [Off] is set, click [Protocol] and set the SMTP protocol to [On]. Enter the host name or IP address of the SMTP server. SMTP Port Number Specify the port number to be used for SMTP. The default port number is 25. SMTP Server Timeout Set the amount of time to wait before time-out in seconds. Authentication Protocol To use SMTP authentication, enter the user information for authentication. SMTP Security Set SMTP security. Turn on "SMTP Security" in "SMTP (E-mail TX)" on the [Protocol Settings] page. Connection Test Tests to confirm that the E-mail function is operating under the settings without sending a mail. Domain Restriction To restrict the domains, click the [Domain List] and enter the domain names of addresses to be allowed or rejected. Restriction can also be specified by e-mail address. 2-57
![](/manual_guide/products/kyocera-ecosys-p8060cdn-ecosys-p8060cdn-operation-guide-3a682b4/101.png)