Kyocera ECOSYS P8060cdn ECOSYS P8060cdn Operation Guide - Page 233

Setup and Registration (System Menu) > System Menu For Custom 1-8, settings for duplex printing and media type name can be changed. Item Description Duplex Print Prohibit Duplex printing allowed. Permit Duplex printing not allowed. Name Change names for Custom 1-8. Names should be not more than 16 characters. Selecting media type at multipurpose tray, the name after change will be displayed. Character Entry Method (page 11-9) Measurement [System Menu/Counter] key > [Common Settings] > [Measurement] Item Measurement Description Select inch or metric for the unit for paper dimensions. Value: mm, inch Error Handling [System Menu/Counter] key > [Common Settings] > [Error Handling] Select whether to cancel or continue the job when error has occurred. Item Duplexing Error Finishing Error No Staple Error Finished Pages Exceeded Description Set what to do when duplex printing is not possible for the selected paper sizes and media types. Value 1-sided: Printed in 1-sided Display Error: Message to cancel printing is displayed. Set alternative actions when finishing (Staple/Punch/Offset) is not available for the selected paper size or media type. Value Ignore: The setting is ignored and the job is printed. Display Error: Message to cancel printing is displayed. Set what to do when staples run out during printing. Value Ignore: Printing continues without stapling. Display Error: Message to cancel printing is displayed. NOTE Requires the optional Document Finisher. Set what to do when finishing (stapling or offsetting) capacity is exceeded during printing. Value Ignore: Printing continues without finishing. Display Error: Message to cancel printing is displayed. NOTE Requires the optional Document Finisher. 8-13