Kyocera ECOSYS P8060cdn ECOSYS P8060cdn Operation Guide - Page 246

Setup and Registration (System Menu) > System Menu Item Auto Cassette Change Wide A4 Resolution KIR Printing Job Terminator Description Select the following actions when the paper runs out in the paper source while printing. Value: Off, On NOTE • When selecting [Off], the machine displays "Add the following paper in cassette #." (# is a cassette number) or "Add the following paper in the multipurpose tray.", and stops printing. • Load the paper according to the paper source displayed to resume printing. • To print from the other paper cassette, select [Paper Selection]. Select the desired paper source. • When selecting [On], the machine continues printing automatically when the other cassette contains the same paper as the currently-used cassette. Turn this to on to increase the maximum number of characters that can be printed in a line for an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). This setting is only effective in PCL6 emulation. Value: Off, On Set the resolution used for printing. Value: 600 dpi, 1200 dpi NOTE Settings that are received from the printer driver have priority over the operation panel settings. Select the default KIR (smoothing) setting. Value: Off, On You can select the condition which regarded as a job termination if the print job could not be processed until the end due to your environment and the other reason. Value EOJ (End of Job): The command recognized as a termination of the job data is regarded as one job until it is detected. End of Network Session: The data included in a network session at network connection is regarded as one job. UEL (Universal Exit Language): The UEL included in the termination of the job data is regarded as one job until it is detected. 8-26