Kyocera ECOSYS P8060cdn ECOSYS P8060cdn Operation Guide - Page 257
Auto, 10BASE-T Half, IP Address Stateless
![]() |
View all Kyocera ECOSYS P8060cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
Setup and Registration (System Menu) > System Menu IPv6 Item IPv6 RA (Stateless) Manual Setting DHCP Description Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/ IP] is [On]. Select whether to use IPv6. Value: Off, On NOTE Selecting [On] displays IP address in [IP Address (Link Local)] after restarting the network. Select whether to use RA (Stateless). Value: Off, On NOTE This function is displayed when [IPv6] is set to [On]. Selecting [On] displays IP address in [IP Address (Stateless)] after restarting the network. Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6). Value IP Address (Manual): 128-bits address is expressed in eight groups consisting of four-digit hexadecimal digits. The groups are separated by colon (:). Prefix Length: 0 to 128 Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit hexadecimal digits. The groups are separated by colon (:). NOTE This function is displayed when [IPv6] is set to [On]. To enter "Default Gateway", set [RA (Stateless)] to [Off]. Select whether to use the DHCP (IPv6) server. Value: Off, On NOTE This function is displayed when [IPv6] is set to [On]. Selecting [On] displays IP address in [IP Address (Stateful)] after restarting the network. IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. LAN Interface Item LAN Interface Description Specify the settings for the LAN interface to be used. Value: Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-TX Half, 100BASE-TX Full, 1000BASE-T IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. 8-37
![](/manual_guide/products/kyocera-ecosys-p8060cdn-ecosys-p8060cdn-operation-guide-3a682b4/257.png)