Kyocera ECOSYS P8060cdn ECOSYS P8060cdn Operation Guide - Page 342

Troubleshooting > Troubleshooting S Message Checkpoints Corrective Actions Reference Page SSD error. - An error has occurred on the - SSD. Job is canceled. Select [End]. The error cords are as follows. 01: The amount of data that can be saved at once has been exceeded. Restart the system or turn the power OFF/ON. If the error still occurs, divide the file into smaller files. If the error occurs after the file is divided, the SSD is damaged. Execute [System Initialization]. 04: Insufficient space on the SSD to complete this operation. Move data or delete unneeded data. Staple is empty. *1 Has the staple cartridge holder run out of staples? NOTE Please be aware that when you carry out initialization of the system, the data saved in SSD will be erased. If the staples are depleted, the machine will stop and the location of staple depletion will be indicated on the screen. Leave the machine on and follow the instructions to replace the staple case. Select [Continue] to print without stapling. Select [Cancel] to cancel the job. page 10-8 page 10-9 page 10-11 Staple is empty. (Manual Staple) Has staple cartridge holder A run out of staples? Add staples to staple cartridge holder A. page 10-9 Staple jam. - If a staple jam occurs, the machine will stop and the location of the jam will be indicated on the screen. Leave the machine on and follow the instructions to remove the jammed staple. page 10-87 System error. - System error has occurred. - Follow the instructions on the screen. *1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details on Auto Error Clear, refer to the following: Auto Error Clear (page 8-50) 10-31