Kyocera ECOSYS P8060cdn ECOSYS P8060cdn Operation Guide - Page 180

Operation on the Machine > Manual Staple Manual Staple You can staple copied paper manually without any print operation. It is useful when you have forgotten to set the staple sort mode before starting printing. NOTE • This function requires the optional Document Finisher: 4,000-Sheet Finisher (page 11-24) • If there are no staples when manual stapling is performed, the stapling position lamps and stapling position key LEDs all blink. Add staples. Replacing Staples (4,000-Sheet Finisher) (page 10-9) • Manual stapling cannot be executed when the machine is in operation. Maximum number of sheets available for manual stapling Paper size A4, A4-R, B5, Letter, Letter-R, 16K A3, B4, Folio, Ledger Paper weight 52 - 90 g/m2 (14.0 - 24.0 lb. Bond) 91 - 105 g/m2 (24.3 - 28.0 lb. Bond) 65 sheets 55 sheets 30 sheets 30 sheets Use the keys on the control section of the Finisher (optional) for manual stapling. 1 2 3 1 Stapling position lamps 2 Stapling position key 3 Stapling key / lamp 1 Press the stapling position key on the stapling control section. The shutter of the paper exit area is opened and this equipment enters into the manual staple mode. 2 Set the staple position. Press the stapling position key to select the stapling position (Back / Front / 2 Points ). Operation is not possible while the stapling position lamps are blinking. Operate after the lamps light solidly. 5-30