Kyocera ECOSYS P8060cdn ECOSYS P8060cdn Operation Guide - Page 156
Program, Registering Programs
![]() |
View all Kyocera ECOSYS P8060cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Operation on the Machine > Program Program By registering sets of frequently used functions as a single program, you can simply press the program number as needed to recall those functions. You can also name the programs for easy identification when recalling. NOTE • Up to 50 functions combining printing can be registered in the program. • If user login administration is enabled, you can only register functions by logging in with administrator privileges. Registering Programs The following procedure is an example of registering the printing a document stored in a Custom Box. 1 Display the screen. 1 [Home] key > [Custom Box] 2 Select the box containing the document you want to print. NOTE If a custom box is protected by a password, enter the correct password. 3 Select [Open]. 4 Select the document in the list that you want to print by selecting the checkbox. The document is marked with a checkmark. NOTE To deselect, select the checkbox again and remove the checkmark. 5 Select [Print]. 6 Select the [Program] tab while paper selection, duplex printing, etc. are set. 2 Register the program. 1 [Add] > Select a number (01 to 50) for the program number > [Next] NOTE If you select a program number already registered, the currently registered functions can be replaced with a new set of functions. 2 Enter the new program name > [Save] The program is registered. To display a registered program on the Home screen, select [Yes] on the confirmation screen that appears, proceed to step 2-3. 3 Specify the position in which you want to display the icon of registered program. 4 Select [Save]. 5-6
![](/manual_guide/products/kyocera-ecosys-p8060cdn-ecosys-p8060cdn-operation-guide-3a682b4/156.png)