Kyocera ECOSYS P8060cdn ECOSYS P8060cdn Operation Guide - Page 256
Wired Network Settings
![]() |
View all Kyocera ECOSYS P8060cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
Setup and Registration (System Menu) > System Menu Wired Network Settings [System Menu/Counter] key > [System/Network] > [Network] > [Wired Network Settings] Configure wired network settings. TCP/IP Setting TCP/IP Item IPv4 IP Address Subnet Mask Default Gateway DHCP Auto-IP Description Select whether to use TCP/IP Protocol. Value: Off, On Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/ IP] is set to [On]. Set the IP address. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Set the IP subnet mask. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Set the IP gateway address. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Select whether to use the DHCP (IPv4) server. Value: Off, On Select whether to use Auto-IP. Value: Off, On IMPORTANT • When setting the Auto-IP, enter "0.0.0.0" in [IP Address]. • After changing the setting, restart the network or turn the machine OFF and then ON. 8-36
![](/manual_guide/products/kyocera-ecosys-p8060cdn-ecosys-p8060cdn-operation-guide-3a682b4/256.png)