Kyocera ECOSYS P8060cdn ECOSYS P8060cdn Operation Guide - Page 98
Changing Device Information, Display the screen., Specify the host name.
![]() |
View all Kyocera ECOSYS P8060cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Installing and Setting up the Machine > Command Center RX Changing Device Information 1 Display the screen. 1 Launch your Web browser. 2 In the address or location bar, enter the machine's IP address or the host name. Click in the following order to check the machine's IP address and the host name. [Device Information] in the home screen > [Identification/Wired Network] 3 Log in with administrator privileges. The factory default setting for the default user with administrator privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).) Login User Name: Admin Login Password: Admin 4 From the [Device Settings] menu, click [System]. 3 1 2 2 Specify the host name. Enter the device information, and then click [Submit]. IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. To restart the network interface card, click [Reset] in the [Management Settings] menu, and then click [Restart Network] in "Restart". 2-54
![](/manual_guide/products/kyocera-ecosys-p8060cdn-ecosys-p8060cdn-operation-guide-3a682b4/98.png)