Kyocera KM-2030 Print System K Instruction Handbook (Functions)
Kyocera KM-2030 Manual
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-2030 manual content summary:
- Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 1
ppm copier) s 2. Printer Settings (20 ppm copier) s 3. Memory Card / RAM Disk Chapter 2 Software-related operation s 1. Procedure for Installing and Printing with a Printer Driver s 2. Windows XL Driver s 3. Printer Driver for Windows 95/98 s 4. Printer Driver for Windows NT s 5. Printer Driver for - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 2
in combination with the Instruction Handbook for that product. This manual contains information on making settings in your printer, as well as on installing and setting the printing properties for the corresponding Printer Drivers. The explanations in this manual were written with - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 3
to you. SUPPLEMENT TO AGREEMENT FOR SOFTWARE BUNDLING AND DISTRIBUTION FOR ALDC 3. developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such developer arose. If you acquired the Program in the United States, this license is governed by the laws - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 4
resident fonts in this printer are licensed from Agfa Japan does not warrant that the Software is free from all bugs, errors and omissions. THE PARTIES AGREE of Agfa Japan in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Agfa Japan. - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 5
List of settings" on page 1-3 for information regarding the various items as well as their corresponding menu numbers and available settings. 1-1 Procedure for making settings 1 Press the Printer key. The machine will switch to the printer (such as with a network address or the time, etc.), use - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 6
Printer Key Copy quality/magnification display Enter (Manual) key Numeric keys Printer Key w[Zoom (-)] key v[Zoom (+)] key Stop/Clear (CANCEL) key Start (GO) key Copy quality/magnification display Enter (Manual) key Numeric - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 7
in (2) Off the Network Card will be printed out as well when the standard Status Page for the printer (menu: P11) or that for use by your service representative (menu: P76) are printed out. A more detailed Status Page is printed out together with the "Service Rep Status Page print out" setting - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 8
1. Printer Settings (15 ppm copier) Menu number Item Available settings P31 KPDL Error Report print out ON/OFF (1) On Sets whether an Error Report will be automatically (2) Off printed out whenever a KPDL error occurs. P32 Auto emulation switching (parallel interface) Sets the back-up - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 9
(sec.) If "000" seconds is selected here, successive pages will not be printed until they are manually force- printed (by pressing the Start key in the printer mode). Remarks Available only when the Network Card is installed. At least 16 MB of additional memory (option) must be installed. 1-5 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 10
appears and (2) Off "On" has been selected here, the error state will be released and the printing operation will be restarted automatically after a specified amount of time. "Memory overflow (error code : E70)" "Print overrun (error code : E80)" P75 Recovery time for Auto Continue 000 - 495 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 11
copier) 2-1 Procedure for making settings 1 Press the Printer key. The machine will switch to the printer mode. 2 Use the "v" and "w" cursor keys to select "MENU" and then press the Enter key. 3 Select the desired setting. (Refer to "2-2 Menu flow chart" on page 2-3 for a list a network address or - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 12
Key Message display Numeric keys (Cursor right) key w(Cursor) key v(Cursor) key Stop/Clear key Printer Key "GO" command "CANCEL" command "MENU" command Message display Numeric keys (Cursor right) key key w(Cursor) key - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 13
address 10 EtherTalk ON/OFF 11 Network Card Status Page print out ON/OFF 12 Emulation protocol 13 Line Printer Code Set 14 IBM Proprinter Code Set 14 DIABLO 630 Code Set 14 Epson LQ-850 Code Set 14 PCL 6 Code Set 14 KPDL KPDL Error Report print out ON/OFF 15 KPDL(AUTO - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 14
2. Printer Settings (20 ppm copier) Font settings Internal Font selection 17 Courier font 18 Letter Gothic font 19 Font List print out 20 Option Font selection 17 Font List print out 20 Printing environment settings Number of copies 21 Printing orientation 22 Page Protect 23 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 15
2. Printer Settings (20 ppm copier) RAM disk ON/OFF 30 RAM disk size 31 Reading data 32 Reading program data 33 Writing data 34 Deleting data 35 Deleting font data 36 Deleting program data 37 Deleting macro data 38 Partition List print out 39 Memory Card settings Reading fonts - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 16
(20 ppm copier) Paper handling settings Duplex mode 51 A4 & Letter usage ON/OFF 52 Bypass mode 53 Other settings Form feed time-out 54 Receive dump mode 55 Printer reset 56 Resource protect mode 57 Auto Continue ON/OFF 58 Recovery time for Auto Continue 59 Service Service Rep - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 17
ppm copier) 2-3 List of settings Item No. Item Display message Available settings Remarks 1 Printer Status Page print out Prints out a list of such items as printer default settings and memory volume, etc. Print Status Page No, Print 2 Interface selection When the optional Network Card - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 18
to for printing out when "KPDL(AUTO)" is selected under the "Emulation protocol" setting (item No.: 13). Alt. emulation Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850, PCL 6, Allows you to set a different emulation for the parallel interface and the Network Card (option). Select - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 19
to set different carriage return handling for the parallel interface and the Network Card (option). Select the desired interface under the "Interface selection" setting (item No.: 2). 26 Wide A4 ON/OFF Increases the printing area on A4 size paper. Wide A4 On, Off 27 Smoothing ON/OFF Allows - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 20
Printer Settings (20 ppm copier RAM disk. 39 Partition List print out List of Partitions No, Print Displayed only when "On printer mode and then press the Enter key. Displayed only when the Memory Card is installed. 45 Deleting data Delete Data Deletes the selected data from the Memory Card - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 21
out List of Partitions No, Print Displayed only when the Memory Card is installed. 51 Duplex mode Duplex Mode None, Short edge bind, Long edge bind Displayed only when the Duplex Unit (option) is installed. 52 A4 & Letter usage ON/OFF Override A4/LT Allows both A4 and letter size paper - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 22
Settings (20 ppm copier) Item No. Item Display message Available settings 55 Receive dump mode Print HEX-DUMP OK The data that the printer receives for debugging programs and files is turned into hexadecimal code and printed out. If "OK" is selected here, this receive dump mode will - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 23
be installed before a RAM Disk can be created. IMPORTANT! The RAM Disk is created from that portion of the printer's memory that is normally available to the user. Thus, if the size of the RAM disk created is too large, printing speed may actually be decreased or the machine may run out of available - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 24
to delete data) D: Parameters ("A" refers to the Memory Card, "2" refers to the type of data [in this case print data] and "SAMPLE.txt" is the name of the corresponding partition) E: Command operation end F: Printer connection port (Network: "PRN", Local: "LPT1", etc.) CAUTIONS • When issuing - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 25
the following procedure when you want to write print data to a Memory Card or RAM Disk from your computer. * In 20 ppm copiers, print data commands are entered from the operation panel on the copier itself. Refer to "2. Printer Settings (20 ppm copier)" on page 2-1 for information on the appropriate - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 26
entitled "FONT1" to a Memory Card C:\WINDOWS>ECHO !R! RWER S,A,0,"FONT1 Printing out the Partition List" for information on printing that list. * In 20 ppm copiers, Partition List print out is accomplished from the operation panel on the copier itself. Refer to "2. Printer Settings (20 ppm copier - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 27
following procedure when you want to read print data that has been saved on a Memory Card or RAM Disk. * In 20 ppm copiers, reading print data is accomplished from the operation panel on the copier itself. Refer to "2. Printer Settings (20 ppm copier)" on page 2-1 for information on the appropriate - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 28
data and font data that has been saved on a Memory Card or RAM Disk. * In 20 ppm copiers, Partition List print out is accomplished from the operation panel on the copier itself. Refer to "2. Printer Settings (20 ppm copier)" on page 2-1 for information on the appropriate procedure. Procedure 1 Open - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 29
for your copier. Driver type Universal driver XL driver KPDL2 driver Macintosh PPD file Description This driver has superior compatibility with application software, thereby enabling WYSIWYG printing. By attaching optional equipment it is possible to easily extend printer functionality. This - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 30
1. Procedure for Installing and Printing with a Printer Driver 1-2 System Conditions qWindows 95 System requirements Recomended requirements CD-ROM drive Parallel interface port CPU RAM HDD CPU RAM HDD IBM PC / AT or compatible - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 31
. s [Network] Click to display the printmonitor's installation menu. Follow the instructions displayed on the screen to install the print monitor. s Documentation Click to display the manual (PDF) supplied with the printer driver. To open this PDF manual, Adobe Acrobat Reader (developed to view PDF - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 32
and Printing with a Printer Driver 1-4 Installing the Printer Driver (Windows) Install the printer driver as follows: * The printer can be connected to the computer by one of the following two methods: local or network. If you want to connect them through network, refer to the operation manual of - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 33
Procedure for Installing and Printing with a Printer Driver 7 Select the driver type. From the list, select the type of driver to be installed, then click Next. * Refer to "1-1 Included printer Drivers" on page 1-1 for information regarding each printer driver. 8 The End User Licence Agreement will - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 34
1. Procedure for Installing and Printing with a Printer Driver 12 Select a printer port. From the list, select the desired port, then click Next. * Normally, set to LPT1. * When installing the printer driver for Windows NT, the Add LPR Port button will appear below the box, so press the button to - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 35
for Installing and Printing with a Printer Driver 1-5 Uninstalling the Printer Driver The following procedure explains how to uninstall the printer drivers. The uninstall program can be found on the CD-ROM that is included with this product. 1 Start Windows. 2 Insert the printer driver installer CD - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 36
Installing and Printing with a Printer Driver 1-6 Printing The following is an example procedure for printing using a printer driver under the conditions and environment noted below. • OS : Windows 95 • Printer driver : KPDL2 Driver • Application : Wordpad • Printing conditions : Print and staple - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 37
1. Procedure for Installing and Printing with a Printer Driver 6 q Printing from the application Use the application that you want to use to open the document that you want to print. 7 Select [Print] in the [File] menu. The [Print] dialogue box will appear. 8 Select the desired number of copies - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 38
of the actual printer driver. * Depending upon the model of your copier, there may be functions that are not supported or that require optional equipment to be installed. Even if the settings for such functions are performed, they will not be effective. * Refer to the Instruction Manual for Windows - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 39
Driver 2-2 Media Tab s Paper Size: Allows you to select a standard size of paper or an envelope size. The following sizes of paper or envelope can be used with this printer. Standard-size paper to have the image printed upside-down. s Source: You can select the source of paper feed according to - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 40
size when you want to print onto a non-standard size of paper. The information registered here will be displayed under the "Page Size" setting in the Media Tab as well as in the Paper Size setting of your application. 1 Select the desired unit of measurement in the "Units" block and the desired - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 41
to have the image on the two sides of the paper printed in the same direction as each other, as though the paper was turned over along its longer edge. * 20 ppm copier: Available only when the optional Duplex Unit is installed. * 15 ppm copier: Duplex printing is NOT available. * Paper sizes, types - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 42
Windows XL Driver 2-4 Imaging Tab s Print Quality: Specifies the printing resolution (number of dots per inch) to be used when printing. Select between "600 dpi [High]", "300 dpi [Low]" and "Draft Mode". If you select the "Draft Mode" option, printing will be accomplished printing in a toner-saving - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 43
Driver 2-5 Output Tab s Output to: Specifies the location of ejection of printed optional Finisher. (Only available in the 20 ppm copier) * In order to set the location of ejection will depend upon the orientation of the paper and the direction of the printed image. Thus, when you click on either - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 44
in the printer. If you make a mistake in the setting here, it is possible that printing will not be accomplished properly. s RAM Disk Specifies the amount of memory to be used for the RAM disk. This setting will only be available when you have selected "RAM Disk" in the "Device Options" list. s User - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 45
., does happen to occur or if the image is in any other way not printed correctly. 2-6-2 Administrator Settings s Job Accounting This setting is used when Copy Management is turned ON in the printer. If the Management code that you enter in the "Management Code" field here and that registered in the - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 46
of the actual printer driver. * Depending upon the model of your copier, there may be functions that are not supported or that require optional equipment to be installed. Even if the settings for such functions are performed, they will not be effective. * Refer to the Instruction Manual for Windows - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 47
for Windows 95/98 3-2 Paper Tab (Universal Driver) s Paper size: Select the size of standard-size paper sheet or envelope. The following standard-size paper sheets and envelopes can be used with this printer: Standard-size paper sheet Envelope Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 48
along the shorter edge. * 20 ppm copier: Available only when the optional Duplex Unit is installed. * 15 ppm copier: Duplex printing is NOT available. * Paper sizes and source of paper feed that are acceptable for duplex printing are as follows: Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 49
3. Printer Driver for Windows 95/98 3-3 Graphics Tab (Universal Driver) s Resolution: Specify the desired print resolution. The resolution must be when printing detailed objects. Generally, if you select "Use vector graphics" printing speed will be increased. However, if you experience trouble (the - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 50
Device Option Tab (Universal Driver) s Print quality:(Management Code) This setting is used when Copy Management is turned ON in the printer. If the Management code that you selected from the dropdown list here and that selected in the printer itself do not match, printing will not be possible. The - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 51
Prints widthwise. [Rotated Prints the image upside-down when "Landscape" is selected. s Paper source: You can select the source of paper feed according to the tray or the desired type of paper. Selection is possible from among the following items. If you select "AutoSelect Tray", the printer - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 52
Printer Driver for Windows 95/98 3-5-1 More Paper Options (KPDL2 Driver) s Printing on both sides (duplex printing) Allows you to set the desired duplex mode. The factory default setting is "None". [None Does not print on both sides. [Flip on long edge Prints - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 53
3. Printer Driver for Windows 95/98 3-6 Graphics Tab (KPDL2 Driver) s Resolution: Specify the desired print resolution. The resolution must be have made changes, click Use printer's settings. s Special: [Print as a negative image] ...... Prints a negative of the image by complementing the RGB values - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 54
for Windows 95/98 3-7 Device Options Tab (KPDL2 Driver) s Available printer memory (in KB) Indicates the amount of memory available for printing. As this is determined according to the amount of memory entered as the "VM Option" setting under "Installable Options", there is normally no need to - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 55
and Color Source of paper feed: Any tray EXCEPT the Bypass Tray q Management Code This setting is used when Copy Management is turned ON in the printer. If the Management code that you selected from the dropdown list here and that selected in the printer itself do not match, printing will not be - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 56
3. Printer Driver for Windows 95/98 3-8 PostScript Tab (KPDL2 Driver) Allows you to make PostScript-related settings. Refer to On-Line Help for more detailed information. 3-11 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 57
of the actual printer driver. * Depending upon the model of your copier, there may be functions that are not supported or that require optional equipment to be installed. Even if the settings for such functions are performed, they will not be effective. * Refer to the Instruction Manual for Windows - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 58
4. Printer Driver for WindowsNT 4-2 Paper/Output (Universal Driver) s Paper Size: Select the size of standard-size paper sheet or envelope. Selection can be made in the "Change 'Paper Size' Setting" area. The following standard-size paper sheets and envelopes can be used with this printer: - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 59
along the longer edge. * 20 ppm copier: Available only when the optional Duplex Unit is installed. * 15 ppm copier: Duplex printing is NOT available. * Paper sizes and source of paper feed that are acceptable for duplex printing are as follows: Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 60
Source of paper feed: Any tray EXCEPT the Bypass Tray Note If you want to staple your printed sets, be sure to use a Collator driver. (Refer to "Collator driver" on page 1-1.) s Print Quality (Management Code) This setting is used when Copy Management is turned ON in the printer. If the "management - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 61
"Properties" in step 4 on page 4-1 and then click on the "Device Settings" Tab. s Installed Memory (Kilobyte) Perform this setting according to the amount of memory in your printer. If a mistake is made in this setting, there is a possibility that printing will not be accomplished properly. 4-5 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 62
. [Rotated Prints the image upside-down in a "Landscape" (widthwise) orientation. s Paper Source: You can select the source of paper feed according to the tray or the desired type of paper. Selection is possible from among the following items. If you select "Automatically Select", the printer will - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 63
binds along the longer edge. [Short Side Prints on both sides and binds along the shorter edge. * 20 ppm copier: Available only when the optional Duplex Unit is installed. * 15 ppm copier: Duplex printing is NOT available. * Paper sizes, types and source of paper feed that are acceptable for duplex - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 64
4. Printer Driver for WindowsNT 4-8 Document Options (KPDL2 Driver) 4-8-1 PostScript Options: Allows you to make PostScript-related settings. Refer to On-Line Help for more detailed information. 4-8 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 65
Printer Driver for WindowsNT 4-8-2 Printer Features s EcoPrint: Saves on toner. Setting can be made in the "Change 'EcoPrint' Setting" area. The factory default setting is "Off". s Paper into the optional Finisher. (Only available with 20 ppm copiers.) * In order to set the location of ejection for - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 66
and Color Source of paper feed: Any tray EXCEPT the Bypass Tray s Management Code: This setting is used when Copy Management is turned ON in the printer. If the "management code" selected in the "Change 'Management Code' Setting" area does not match the one set on the printer, printing will not be - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 67
capacity of your printer. After increasing memory, perform the setting here according to the "Memory" setting below. s Memory Perform this setting according to the amount of memory in your printer. If a mistake is made in this setting, there is a possibility that printing will not be accomplished - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 68
of the actual printer driver. * Depending upon the model of your copier, there may be functions that are not supported or that require optional equipment to be installed. Even if the settings for such functions are performed, they will not be effective. * Refer to the Instruction Manual for Windows - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 69
20 ppm copier must be equipped with the optional Duplex Unit. * It is necessary to enable "Advanced Printing Features" in order to perform this setting. Refer to "s Advanced Printing Features" on page 5-5. Example: With 2-Up printing Prints reduced images of 2 full pages onto a single sheet of paper - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 70
Printer Driver for Windows2000 5-3 Paper/Quality Tab : (Tray Selection) s Paper Source: You can select the source of paper a possibility that printing will be accomplished onto paper that is difference the expected. * 20 ppm copier: Tray 3 and - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 71
explained in this Instruction Handbook. 5-4-1 Paper/Output s Paper Size: Select the size of standard-size paper sheet or envelope. Selection can be made in the drop-down list. The following standard-size paper sheets and envelopes can be used with this printer: Standard-size paper sheet Envelope - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 72
5. Printer Driver for Windows2000 5-4-3 Document Options s Advanced Printing Features: Be sure to select "Enable" for this setting if you want to use the "Pages Per Sheet" (N-Up) function or the "Back to Front" option under the "Page Order" setting. 5-5 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 73
5. Printer Driver for Windows2000 5-4-4 Printer Features s Eco print: Saves on toner. The factory default setting is "Off". s Paper Destination: Copies will be ejected into the optional Finisher. (Only available with 20 ppm copiers.) * In order to set the location of ejection for the Job Separator - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 74
and Color Source of paper feed: Any tray EXCEPT the Bypass Tray s Management Code: This setting is used when Copy Management is turned ON in the printer. If the Management code that you selected from the dropdown list here and that selected in the printer itself do not match, printing will not be - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 75
5. Printer Driver for Windows2000 5-4-5 PostScript Options: This option can only be used with a KPDL2 Driver. Allows you to make PostScript-related settings. Refer to On-Line Help for more detailed information. 5-8 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 76
Job Separator or Finisher (only available with 20 ppm copiers) are installed. s Duplex Unit Perform this setting when the optional Duplex Unit (only available with 20 ppm copiers) is installed. s Optional Disk (only available with KPDL2 Driver) Perform this setting when you want to create a RAM - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 77
start installation of the printer driver. Follow the instructions displayed on the screen to install the printer driver. B: [Documentation] Click to display the manual (PDF file) supplied with the printer driver. To open this PDF manual, Adobe Acrobat Reader (developed to view PDF files) is required - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 78
6. Printer Driver for Macintosh 2 Double-Click on the icon for the CD-ROM disk. "A copy machine product name of use" dialog box will appear. 3 Double-Click on " - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 79
once on the LaserWriter 8 icon. 8 Select the name of this printer in the [Select a PostScript Printer] list and then click on the [Create] button. * The name of this printer can be verified by printing out a Status Page from the printer's operation panel. 9 A dialog box for selecting the appropriate - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 80
"Auto Select" here, be sure that the "Page Policy" setting is set to "Auto Size Select" or there is a possibility that printing will be accomplished onto paper that is difference the expected. * 20 ppm copier: Tray 3 and Tray 4 are available only when the Option Cassette is installed. * 15 ppm - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 81
is selected, the printer will print on both sides of the paper. [Binding] Enable selection of the desired the binding orientation. If left button is selected, the binding orientation is along the side of the paper. * 20 ppm copier: Available only when the optional Duplex Unit is installed. * 15 - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 82
setting is used when Copy Management is turned ON in the printer. If the Management code that you selected from the dropdown list here and that selected in the printer itself do not match, printing will not be possible. s Smoothing: Turning this setting "On" allows the jaggies that appear around - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 83
6. Printer Driver for Macintosh s Staple: It is possible to staple your copy sets if the optional Finisher is installed. * Stapling is only available with 20 ppm copiers. * The following settings are required before stapling is possible: (1) Change the "Installable Options" setting in step 9 on page - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 84
that you are using. * For the user using Mac OS 7.6.1, we strongly recommend that you update the LaserWriter8.3.2 to Laser Writer 8.5.1. s Format for: Use this pop-up menu to select the Printer that you want to use. s Paper: Select in this pop-up list the desired paper size. Choose from among Letter - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 85
6. Printer Driver for Macintosh 6-7 PostScript Dialog Box The actual layout of each dialog box that you are using. s Visual Effects: Visual effects such as horizontal and vertical flip and image inverting can be selected here. Place a check in the check box next to the desired visual effects - Kyocera KM-2030 | Print System K Instruction Handbook (Functions) - Page 86
6. Printer Driver for Macintosh 6-8 Custom paper sizes Dialog Box When a paper sizes is selected in "Custom paper sizes" Dialog Box , the paper size can be set as desired. * The actual layout of each dialog box and the available options and settings may differ somewhat depending upon the
INSTRUCTION HANDBOOK
<Functions Edition>
Revision 1
Introduction
Chapter 1
Printer-related operation
■
1. Printer Settings (15 ppm copier)
■
2. Printer Settings (20 ppm copier)
■
3. Memory Card / RAM Disk
Chapter 2
Software-related operation
■
1. Procedure for Installing and Printing
with a Printer Driver
■
2. Windows XL Driver
■
3. Printer Driver for Windows 95/98
■
4. Printer Driver for Windows NT
■
5. Printer Driver for Windows 2000
■
6. Printer Driver for Macintosh