Kyocera KM-2030 Print System K Instruction Handbook (Functions) - Page 58

4. Printer Driver for WindowsNT 4-2 Paper/Output (Universal Driver) s Paper Size: Select the size of standard-size paper sheet or envelope. Selection can be made in the "Change 'Paper Size' Setting" area. The following standard-size paper sheets and envelopes can be used with this printer: Standard-size paper sheet Envelope Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Ledger (11" x 17"), Statement (5 1/2" x 8 1/2"), A3, A4, A5, A6, Folio (210 x 330 mm), JIS B4, JIS B5, JIS B6 COM-10, Monarch, DL, C5 s Orientation: Select the print orientation from the following: Selection can be made in the "Change 'Orientation' Setting" area. The factory default setting is "Portrait". [Portrait Prints lengthwise. [Landscape Prints widthwise. s Paper Source: You can select the source of paper feed according to the desired tray. Selection is possible from among the following items. If you select "Automatically Select", the printer will automatically choose the tray that contains the most appropriate paper for the job. The factory default setting is "Automatically Select". Tray Automatically Select, Tray 1, Tray 2, Tray 3, Tray 4, Bypass Tray * 20 ppm copier: Tray 3 and Tray 4 are available only when the Option Cassette is installed. * 15 ppm copier: Tray 2, Tray 3 and Tray 4 are available only when the Option Cassette is installed. s Copy Count: Set the number of copies to be made. The allowable range is from 1 to 999. Setting can be made in the "Change 'Copy Count' Setting" area. Click the arrow buttons (v,w) or enter directly from the keyboard. The factory default setting is "1". 4-2